Naah alright that's just me being stupid :) I should have listened to my
common sense saying using acl for this function sounds stupid and I should
have tried prefix-list.
I shouldn't have trusted the router when it came up with:
(config-isis-af)#spf prefix-priority high ?
WORD Access-list
On Dec 5, 2012, at 3:57 AM, zaid wrote:
hi
I can't access the internet when config ip unnumbered on the
subinterface, any idea this is my config
interface Loopback1
ip address x.x.x.x 255.255.255.255
Is that really the subnet you're using? If so, what IP are you
giving the device on
Hi Folks,
Below is my IPv6 configurations about MQC:
ipv6 access-list FTPV6
permit tcp any any eq ftp
class-map match-all FTPV6
match access-group name FTPV6
policy-map test
class FTPV6
set dscp cs7
interface TenGigabitEthernet9/1
ip address 2.2.2.254 255.255.255.0
load-interval 30
ipv6
Hi Lee,
You can configure multiple bridge-group to accomodate additional network in ASA
5500.
please refer
to http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/interface_complete_transparent.html#wp1321196
regards,
Rano
From: Ge Moua
On (2012-11-30 13:13 +0100), Gert Doering wrote:
What we did was: get octopus, intern, crimp equipment, put octopus cable on
patch panel.
The cisco octopusses are quite expensive. Is there 3rd party vendor for
4xassync smart serial and to the 8xoctopus HWIC side connectors, so we
could build
hi all
I can't get fair load balanced over parallel equal path even if I use mls ip
cef load-sharing full simple to include L4 on 7606 / 720 3cxl
any helpful info plz
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
How many links? load sharing is done in hardware and it can't do perfectly
equal load sharing for links of a power of 2.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
Hi All,
I have a very simple configuration I am having problem with.
track 2 rtr 1 reachability
!
ip sla 1
icmp-echo 10.1.18.49 source-ip 10.0.254.30
timeout 500
frequency 3
ip sla schedule 1 life forever start-time now
!
ip route 0.0.0.0 0.0.0.0 10.0.254.25 50 track 2
ip route 0.0.0.0 0.0.0.0
On 12/5/12 9:10 PM, Ali Sumsam wrote:
Hi All,
I have a very simple configuration I am having problem with.
track 2 rtr 1 reachability
!
ip sla 1
icmp-echo 10.1.18.49 source-ip 10.0.254.30
timeout 500
frequency 3
ip sla schedule 1 life forever start-time now
!
ip route 0.0.0.0