I am writing an automated configuration script, where I want to create a
policy-map and attach it to an interface, in some ME 3400's.
The environment is such that I would like to determine the configuration
commands to give, using SNMP only, i.e. without any show command and
without access to
Hi Herro,
Disclaimer: I have no experience with configuring 802.1ag OAM on Cisco, but
have been experimenting with it extensively on Brocade equipment.
On 5 mrt. 2014, at 18:19, Herro91 herr...@gmail.com wrote:
1) I think I should be seeing MIPs in my traceroute when there is a P
router in
Hi,
Herro91
Sent: Wednesday, March 05, 2014 6:19 PM
1) I think I should be seeing MIPs in my traceroute when there is a P router
in between the two PEs, correct?
It is a L2 form of traceroute so it will record only L2 hops configured as MIPs
or MEPs.
So in a p2p PW there are going to be
Why not frequently pull the config using the config-copy-MiB, link and store
the interface service-policy in a DB (or I guess CSV) and use that? I suppose
you could also just in time pull the config, but for every transaction that
would suck.
You do need TFTP access for this...
Sent from my
Folks - I'm looking to see if anyone has ever successfully used the LUA
scripting feature on the ASA for doing authorization.
Trying to setup Certificate authentication for VPN users, and authorizing
against LDAP (AD) but my fields don't match one to one, and hence I was
hoping to use the LUA
Il 11/03/2014 14:03, Garrett Skjelstad ha scritto:
Why not frequently pull the config using the config-copy-MiB, link
and store the interface service-policy in a DB (or I guess CSV) and
use that? I suppose you could also just in time pull the config, but
for every transaction that would suck.
On Mon, 2014-03-10 at 11:53 +0100, Lukas Tribus wrote:
%CELLWAN-2-MODEM_DOWN: Modem in HWIC slot 0/0 is DOWN
This means you are experiencing a modem firmware crash.
Also read Cisco 3G and 4G Serviceability Enhancement User Guide [1].
Ah, thanks for the pointer. It's good read.
It's a
I am attempting apply per VLAN shaping on the 3850 chassis and having
various problems;
1: I have attempted creating policy-maps and applying them to the VLAN SVI.
Config mode takes the service-policy commands, with no errors in the log,
but a show run on the interface indicates that nothing
Peter,
Can you show how did you try to apply the QOS policy per VLAN?
Basically, you should be able to apply a policy per SVI (i.e. interface VLAN)
This is the QOS configuration guide for the Catalyst 3850:
