On Wednesday, October 15, 2014 04:37:34 AM Troy Boutso
wrote:
> Ultimately I want to know am I simply hitting a practical
> limit of the box already?
> I'm very scared to enable more WAN links on these routers
> as I am affraid it will max out the available resources.
It's been a while since I r
!Buenas deas, Amigo!
I have C7609 with ES20 cards and SUP720.
I want to terminate about 7K VLANs to IP subinterfaces.
So, I have created QinQ subinterfaces for solve problems with 4094 Vlans.
But when I typed "sh vlan internal usage", I see internal vlan one per
subinterface !!!
And really, I c
Hey
I have recently deployed several 7201s (NPE-G2 Processor/1G RAM) in a
network, which once primarily consisted of Cisco 3570 Switches acting as
routers, but due to the requirement of more advanced features such as
traffic shaping, MPLS, VPNs etc. My company has decided to purchase this
platform
Speaking for my own experience, it wasn't a problem. From memory we had to
change one RADIUS attribute we were using for shaping I believe (we were
using an older attribute that caused a full VAI to be created, updating
that fixed it). We don't do PBR however.
One thing I would suggest however - i
On 14/10/14 14:55, jure brkljacic wrote:
> How to check if IPv4 multicast is working in both directions without the
> access to BGP router?
It's a good question. Probably easier to debug IPv6 ND packets on your
ASR and see if that's what is causing "IPv6" to fail. :)
(Also, 'show ipv6 neigh' work
Reviving this thread;
Lab'bing hasn't gone as well as I had expected. Testing with
ASR1002X's the lac of Policy Based Routing has been a blow and the
lack of full Virtual Access Interfaces is a pain.
How is everyone managing without these features if you were once PBR
on your 72xx platforms for e
On 14 Oct 2014, at 15:00, James Bensley wrote:
> Hi Steve,
>
> What was the outcome of your TAC case, did you resolve this I'd like
> to hear what was going on here.
>
> Kind regards,
> James.
Hi
Case is still open with TAC, we have improved the situation but not resolved it
yet.
I am just
Hi All,
I had some notes on the licenses for ASRs and subscriber counts when
using them for LNS/BNG services, but I can't find my notes now.
When purchasing FLASR1-BB-RTU with FLASR1-BB-16K for example, are
these software licenses that need applying on the box or just "soft"
licenses, the kind yo
Hi Steve,
What was the outcome of your TAC case, did you resolve this I'd like
to hear what was going on here.
Kind regards,
James.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http:
Hi,
Thanks for help. I do not have the access to BGP router (the "picture" from
the first mail)
IPv4 broadcast should be working. ARP resolution OK, IP reachability OK,
BGP neighbor OK.
How to check if IPv4 multicast is working in both directions without the
access to BGP router?
On Tue, Oct 14,
> Hi,
>
> We have a problem with IPv6 traffic over xconnect between two directly
> connected C7606 MPLS routers
>
>
> ASR1k(IPv4/IPv6) ---MPLS#1MPLS#2--BGP router(IPv4/IPv6)
>
> All interfaces are 10G
>
> a.) IPv4 is working without any problems
> b.) IPv6 is not working
>
>
> ->>Li
Hi,
We have a problem with IPv6 traffic over xconnect between two directly
connected C7606 MPLS routers
ASR1k(IPv4/IPv6) ---MPLS#1MPLS#2--BGP router(IPv4/IPv6)
All interfaces are 10G
a.) IPv4 is working without any problems
b.) IPv6 is not working
->>Linecards used on 7606 r
12 matches
Mail list logo
