Matt,
I tried both and either actually solves the issue, thank you very much. I
forgot it does not recursively check routes if multi-hop is not turned on.
--
Ryan McHugh
On Mon, Nov 17, 2014 at 4:28 PM, Matthew Melbourne
wrote:
> Hi Ryan,
>
> Does it make a difference if you reconfigure you
Answered my own question:
RTR-11# sh system internal forwarding vrf V107 ipv6 route module 7
Hardware IPv6 FIB entries for table V107/base
0::/127, Index: 0x1
Dev: 1 Adj Index: 0xa002, Lif Base: 0, Egress Lif: 0x0
fe80::/10, Index: 0x81e2c
Dev: 1 Adj Index: 0x88200, Lif
Anyone know how to translate vrf into ipv6 table on an N7K?
RTR-1# show system internal forwarding table 0x0b ipv4 route module 7
Routes for table V107/base
+-+--+--+--+---
Dev | Prefix | PfxIndex | AdjIndex | LIFB | LIF
+-
I have what I believe is a MPLS TE config between an me3600 and asr9k.
When I no shut the tunnel interface (bring the tunnel up) on the ME3600,
routing breaks to subnets located on me3600 in vrf "one". If I shut the
tunnel interface on the asr9k, routing to me3600 subnets is still broken ,
but
Hi,
> Hi all , we were arguing about the full duplex FE interface and it's speedIs
> it true that this interface can handle 100Mbps send and 100Mbps receive at
> the same time? like it is 200Mbps ?
sort of :-) yes, its 100mbit in both directions - so in theory you can be
uploading and download
Yes. Full duplex means you can send and receive at the same time, without
one impacting the other. If your transmitting device (on each side) has
enough buffer memory to space out bursty traffic, you'll come really close
to sending 100 mbps constantly.
Chuck
-Original Message-
From: cis
> Hi all , we were arguing about the full duplex FE interface and it's speedIs
> it true that this interface can handle 100Mbps send and 100Mbps receive at
> the same time? like it is 200Mbps ?
It is 100 Mbps full duplex, sending and receiving 100 Mbps at the same
time. Calling it 200 Mbps is ma
Hi,
we are currently experiencing exact the same problems. Cisco ASA HA
Cluster of 2x 5540 (Active/Standby) with OS 9.1.(2) and a Bintec RS232j
FW Version 9.1 Rev 10 Patch2 but other firmwares are also affected.
The are currently 24 active SAs to other Cisco devices without any
problem.
We
Hi all , we were arguing about the full duplex FE interface and it's speedIs it
true that this interface can handle 100Mbps send and 100Mbps receive at the
same time? like it is 200Mbps ?
Thanks
___
cisco-nsp mailing