Hello guys!
I need router with many types of legacy intergaces including STM-1,
Channelized E1, Async (optionaly). Also I need switch module with 16 - 24
GE-T port and up to 8 SFP ports. Any suggestions?
Thank you!
--
___
cisco-nsp mailing list
Hello Muhammad!
If you use Cisco and can use Virtual Routers on network Cisco CSR1000v will
your best choise. Many guys from list will recomend it for you.
2016-04-25 11:33 GMT+03:00 Mohammad Khalil :
> Hi all
> I have MPLS network with OSPF as the underlying IGP , my
Hello Gavin!
Also you can look for some Extreme Summit switches. They have little price for
10G ports. As I know many IX use this switches.
> 15 окт. 2015 г., в 0:52, Gavin McBride написал(а):
>
> Hello all,
>
> I've been evaluating a few platforms for a smallish
Hello Jason.
You can do BGP and multihoming on Cat 3560 since you got 2 byte AS number, with
4 byte AS number you won’t.
> 31 авг. 2015 г., в 21:43, Jason Berenson
> написал(а):
>
> Greetings,
>
> Was interested in getting any pointers anyone might have about
In addition, can you explain what kind of L2 device you use in SDH?
15 Фев 2015 г. 21:07 пользователь Мурат Каипов mkkai...@gmail.com
написал:
Hello dear.
Do you use some routing protocol? So, if you do, you have two choices.
First, do nothing, and hello and dead timers does failover for you
Hello dear.
Do you use some routing protocol? So, if you do, you have two choices.
First, do nothing, and hello and dead timers does failover for you. Second,
use BFD, and you will have subsecond failover.
Best Regards.
15 Фев 2015 г. 18:03 пользователь M K gunner_...@live.com написал:
HiI have
:00 Marco Marzetti ma...@lamehost.it:
On 11/12/2014 02:50, Мурат Каипов wrote:
Hello Marco, can you show Ip ospf interface on both sides?
Hello,
Of course:
C6500_1#show ip ospf interface brief
InterfacePID AreaIP Address/MaskCost State Nbrs F/C
Lo0 1
Looks pretty good. Does ospf neighbor come up?
11 Дек 2014 г. 3:27 пользователь FF fusionf...@gmail.com написал:
Just a guess, try making sure mpls ip is either enabled or disabled on
both ports. g0/24 does not have it enabled, so I'm pretty sure your mpls
ldp won't be up either.
On Wed,
Hello Marco, can you show Ip ospf interface on both sides?
11 Дек 2014 г. 4:47 пользователь Мурат Каипов mkkai...@gmail.com
написал:
Looks pretty good. Does ospf neighbor come up?
11 Дек 2014 г. 3:27 пользователь FF fusionf...@gmail.com написал:
Just a guess, try making sure mpls ip
Hello Tim!
Now I haven't any optical measurments. I think in two weeks I can do it and
show to you and other guys. Thank you for advice!
How do your 10g link on 110 km now works? You did dwdm or just use link
aggregation with 1g ports?
2014-09-06 14:29 GMT+04:00 Tim Rayner
10 matches
Mail list logo