--
Best regards,
Andriy A. Yerofyeyev.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
I just got access to cisco switch which was configured strange enough.
It show me two additional show commands (part of) before output of each
show command.
Here is an example:
cat1#sh ver
Load for five secs: 4%/0%; one minute: 4%; five minutes: 4%
No time source, *22:06:56.646 UTC Sat May 22 199
Hello group ,
Just wondering , why I cant add file to flash (CF) filesystem on
2811 without Erasing it ?
router#copy
tftp://192.168.0.1/2800/ccme40/cme-124-11XJ-chimes/79x1-backgrounds/List79x1.xml
flash:
Destination filename [List79x1.xml]?
Accessing
tftp://192.168.0.1/2800/ccme40/cme-12
>
> Jun 19 00:22:41.673: MGCP Packet received from 192.168.2.201:2727--->
> AUEP 5102331 [EMAIL PROTECTED]
> <http://66.29.239.162>] MGCP 1.0
> <---
>
> Jun 19 00:22: 41.673: MGCP Packet sent to 192.168.2.201:2727--->
> 500 5102331 Endpt Unknown
> <---
&
about circumstances which happens between him
and call agent. and remains silent.
Is there any way to force mgcp device send periodic status updates
(like "hey, i'm alive") to call agent ?
Thanks , group !
--
Best regards,
Andriy A. Yerofyeyev.
Senior N
Hello group ,
As I understand we have to have Universal Port Card and T1 interface
card if we want to use AS5350 for voip or modem termination.
Could you please help me understand how determine if Universal Port
Card installed into AS5350 ?
How could I know if installed card is AS535