Dear all,
Subject added. Sorry for missing subject on first post.
Any suggestion on the reference clock was welcome!
Thanks
Bob Chan
On Sat, Dec 6, 2014 at 9:10 AM, Bob Chan wrote:
> Dear all,
>
> Do any one using Cisco 7200 as NTP master? and get ref clock from
> Microsemi GPS
Dear all,
Do any one using Cisco 7200 as NTP master? and get ref clock from Microsemi
GPS TOD via Aux port
I used to have a TimeSource3600 to feed TOD to a Cisco7204VXR, but the
TS3600 was dead, and I install a new TimeSource3550 to do the job.
But I found the 7204 cannot get a reliable PPS from
what about IP SLA w/ reaction ?
On Dec 7, 2007 12:35 AM, Scott Granados <[EMAIL PROTECTED]> wrote:
> This might be like fly swatting with sledge hammers but how about BGP in
> this situation?
>
> Depending on your network addressing particulars and your ISP you could do
> something like have each
I think a 1000BaseTX Cat5 UTP GBIC can be used.
On 10/9/07, Vincent Aniello <[EMAIL PROTECTED]> wrote:
>
> Does Cisco offer a Gigabit Ethernet over copper port adapter for a Cisco
> 7206VXR chassis? I have a NPE-G1 processor in the router, which comes
> with 3 GE over copper ports, but I need
the service.
Most of the case, we have no staff in distribution hub. ;-)
Finally, all 1401 was replaced by 2620+ATM25 NM
Bob
On 9/21/07, Gert Doering <[EMAIL PROTECTED]> wrote:
>
> Hi,
>
> On Fri, Sep 21, 2007 at 07:17:01AM +0800, Bob Chan wrote:
> > I will keep aw
I will keep away from 1401,unless your company have a "weekly equipment
reboot" habit
3620+NM ATM25
is a better choice, if you really want to try PPPoA, MTU could be 4470, in
my case
Bob
On 9/21/07, Seth Mattinen <[EMAIL PROTECTED]> wrote:
>
> Sridhar Ayengar wrote:
> > Gert Doering wrote:
> >>