Hi,
Legal authorities require that upon request we provide them with pcap
files of a PPPoVPDN or PPPoE subscriber session we terminate on ASR1000
devices.
I need to limit the captured data to a specific subscriber/IP address.
So far I looked into:
- SPAN: on the ASR1000 SPAN does
Today I tested a Sup2T-XL and a Sup720BXL in the lab with full bgp feeds for
ipv4 and ipv6.
To my understanding the hardware capacity for the FIB TCAM is the same for
Sup720-BXL and Sup2T-XL.
Sup2T-XL output of sh platform hardware capacity:CAT6500-RC2TXL#sh platform
hardware capacity | begin
, the default
setting provides for 512 K IPv4 entries, and this can be increased
through configuration control to support up to 1 M entries if required.
On Tue, 5 Nov 2013, Christian Schmit wrote:
Today I tested a Sup2T-XL and a Sup720BXL in the lab with full bgp
feeds for ipv4 and ipv6.
To my
to accommodate more of one type of forwarding entry. For example, in
the PFC4XL, the default setting provides for 512 K IPv4 entries, and this can
be increased through configuration control to support up to 1 M entries if
required.
On Tue, 5 Nov 2013, Christian Schmit wrote:
Today I tested a Sup2T
Hello,
We need to terminate a lot of double tagged vlans on ASR1K devices
(ASR1006/ESP20)to provide pppoe/dhcp connectivity.
Currently we work with sub-interfaces but as it is difficult to manage and
maintain thousands of sub-interfaces we are looking for a better way to
implement this.
In our
