Hello all
I Have 3 STM-1 links between two routers on an MPLS core network. The problem
is that load balancing for traffic passing through this STM connections is done
only on one way and not on both ways.
Is their any way to balance both ways? OSPF is running as an IGP protocol.
Your advice
Hello All
Is their a way to remove the first AS number (not private) from an AS path?
For example we are receiving a route with AS PATH 123 456 456 456 and we want
to remove the 123 AS and put in the BGP table the route with AS 456 456 456 .
Thanks for your reply
__
Hello all
We are doing etherchanel between two a Cisco catalyst 4509 switchs but load
balancing is not working On the one link we have about 700M and on the other
60M. The configured load balancing method is the default which is (src-dst-ip).
Any ideas?
__
On one link for example where we have an etherchannel between a GSR and a
4510 switch, we see a lot of giant packets on the router side and no giant
packets on the switch side
- Original Message -
From: "Pavel Skovajsa" <[EMAIL PROTECTED]>
To: "Michalis Pal
Hello all
I have some interfaces on my networks (gigabit / ethernet) which report a huge
amount of giant packets. What is the cause of giant packets? Is their any
methodology or any good document which details the way to troubleshoot giant
packets?
All responses will be appreciated.
__
Hello all
I am trying to write a BGP policy using regular expressions for outgoing
filtering. I need to allow customer AS numbers to be announced by our network
as well as any prepends they send or any AS behind our customer's AS.
e.g allow
12345 678 9123
12345 12345
etc
I did try the
Hello all
I configure a policer to limeit traffic to 50Mbs as below but as soon as I
apply the service policy, their is a traffic drop on the interface. Any
suggestion?
Here is my config
mls qos
!
class-map match-any test-policing
match access-group 100
!
!
policy-map test-policing
class
Hello all
We have a 3750 switch with IOS c3750-ipbase-mz.122-25.SEE3 and I was wondering
wether we can put rate limit on the interfaces. If yes I will appreciate if you
send me an example or a reference link.
Regards
___
cisco-nsp mailing list cis