Re: [c-nsp] High SNMP ENGINE CPU usage on VXR 7206

Control plane policing is an option. ~Sony Sent from BlackBerry® wireless -Original Message- From: bharath kondi Sender: cisco-nsp-boun...@puck.nether.net Date: Sun, 25 Jul 2010 23:13:23 To: Subject: [c-nsp] High SNMP ENGINE CPU usage on VXR 7206 Hi All, Please help me on the belo

[c-nsp] CSM probe

Hello, I got a quick question, when the csm is probing the real servers, what source ip does the csm use for the probe?. ~Sony Sent from BlackBerry® wireless ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listin

Re: [c-nsp] sh module csm 2 probe real

ve you try this command on the global config. router(config)#ntp update-calendar Regards, On May 27, 3:30 pm, Sony Scaria wrote: > hello group, > > Can someone please explain me why it is showing "13:36:47 gmt 06/14/70". > I've searched a lot, but i couldnt find any

[c-nsp] sh module csm 2 probe real

hello group, Can someone please explain me why it is showing "13:36:47 gmt 06/14/70". I've searched a lot, but i couldnt find any explanation. btw, my switch is sync with precent time. Switch#sh module csm 2 probe real real = 10.106.110.17:53, probe = PROBE-DNS, type = dns, vserver = W-DNST

[c-nsp] Netflow on multilink

Hi, I've a ppp multilink configured recently, which I want to monitor by a netflow tool. My doubt is whether I should enter the 'ip route-cache flow' command only on interface muiltilink or on member interface (physical interfaces) as well. Thanks, sony Sent via Blackberry®

[c-nsp] changing password on catos

Hello, I was trying to change the password on catos, and this is how the device responded. I want to know whether this (Usage: set password) is just a warning or the password has never been changed!!. Since i use tacacs and the device is in a remote place, i cant test the POLR right now. 6509> (e

[c-nsp] Hybrid to Native conversion

Hi, I have an old 6500 with SUP2 and MSFC2. I Need to convert the configuration to IOS format. Is there any tool available which expedite the process than a manual conversion? Sony. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https:

Re: [c-nsp] Rmon checksum failed on WS-C4006

Thanks Clinton. My Cisco TAC rep also recommends the same. Sony. -Original Message- From: Clinton Work [mailto:clin...@scripty.com] Sent: 06 December 2009 00:15 To: Sony Scaria Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] Rmon checksum failed on WS-C4006 I have seen this problem

[c-nsp] Rmon checksum failed on WS-C4006

Hi All, I've observed "Rmon checksum failed" when I run sh ver on one of my catos switch. The system is stable for a long time and I did not observe any related logs. I had done some research , but couldn't gather any info on "Rmon checksum". cat4013 > (enable) sh ver WS-C4006 Software,

Re: [c-nsp] router boots into ROMMON

I had a similar situation days before where I was upgrading the ios and I was using a flash which I took from a similar spare device . I copied the ios, set conf-reg, set boot path, but the router did not boot from the new code. Finally I formatted the flash, copied the ios again, set boot state

Re: [c-nsp] BGP Community-MED [7:137451]

Metric will be carried into an AS, but will not pass it to a 3rd AS. When the same update is carried to the 3rd AS, the MED value is set to 0. Ps: an optional non transitive attribute must be deleted by a router that has not implemented the attribute. Sony. --Original Message-- From: R.

[c-nsp] Boot statement on 6509E

Hi there, I have a 6509E (SUP 720 ) switch where I am gonna upgrade the IOS . The present code is loaded on sup-bootflash: ( 65Mb). So I added an external disk which gives me enough space. Nor23#dir ? /all List all files /recursive List files recursively all-filesystems List files on al

Re: [c-nsp] Flexwan module - Memory

Thanks a lot Kevin, one more doubt pls, then what is the purpose of Flash in Flexman? Rgds/ Sony On Thu, Oct 15, 2009 at 9:48 AM, Kevin Graham < kgra...@industrial-marshmallow.com> wrote: > > > > > > My doubt are 1. whether these cwan1/0-disk0: and cwan1/1-disk0: are > builtin > > flash modules

[c-nsp] Flexwan module - Memory

I noticed the following on my cisco 6509E, Switch02#dir ? /all List all files /recursive List files recursively all-filesystems List files on all filesystems bootflash: Directory or file name const_nvram: Directory or file name cwan1/0-disk0: Directory or

Re: [c-nsp] best practices switches/Router

Hi, Checkout this link, it might be helpful http://www.nsa.gov/ia/guidance/security_configuration_guides/cisco_router_gu ides.shtml SONY -Original Message- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of jack daniels Sent: 13 October 20