Dears,Is there any command in Cisco IOS 12.x or other version that can enable
option 2 in pim hello. I have an alcatel router neighbored with Cisco 7609 ,
the hello packets are ignored on Cisco that ios coming from alcatel as the have
option2 enabled with delay override timers?How can we get
Dears,
If I need to advertise the ip address which I got from the remotly DHCP
server(connected on another subnet) using the IP helper-address server IP. How
to do the advertisement the client is on a switchport interface with the
interface vlan SVI enabled?
Do I have to configure an IP
Dears,Iam trying to configure VPLS on 6509 with SUP-720, is there a limitation
on the modules which support VPLS. The xconnect is configured on interface vlan
for the giagethernet port.IS there any solution to get the vfi UP?Thank you
___
Dears,
What are the commands used for fast convergence for the ISIS OSPF when link
fails, adjacency rebuild with less CPU, bandwidth recalculation.
For the ISIS authentication when to use the domain area password commands ,
how to authenticate adjacency how to authenticate the
:[EMAIL PROTECTED] On Behalf Of Phil
Bedard
Sent: Sunday, January 20, 2008 9:37 AM
To: Suzan S.
Cc: Cielieska Nathan; [EMAIL PROTECTED]; cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] RIB_failure
Backdoor is used for the opposite scenario, where you want to use IGP routes
over EBGP routes, which
of RIB-failure state.
Regards,
Nate
On Jan 18, 2008, at 4:20 PM, Suzan S. wrote:
Dears,
When advertiseing the loopbacks in the bgp , they appear as RIB-
failure routes in the BGP table as they are advertised through the
IGP which has better adminstrative distance. Any one knows how