[c-nsp] PPPoE related question

Hello, I'm trying to do PPPoE on c3825 router but I faced VPDN related problem. c3825-ipvoicek9-mz.124-11.T4 IOS has only 2 (PPTP, L2TP) options in protocol. vpdn-group 1 accept-dialin * * protocol pptp* * virtual-template 1 I want look like follow. vpdn-group 1 accept-dialin **protocol pp

[c-nsp] about policy-map

Hello, Is it possible to use policy-map if the packet goes to specific IP address. example: If packet goes to subnet 192.168.0.0/24 then router should use policy-map 512Kbps. If packet goes to subnet any then router should use policy-map 256Kbps. How to do it with PPPoE. Really appreciat

[c-nsp] IP_VFR-4-FRAG_TABLE_OVERFLOW

Hello, I've got following message from log on my router 3825. I've googled and some people fixed to increase threshold of ip virtual-reassembly max-fragments xxx max-reassemblies xxx 011777: Mar 10 18:19:03.386 +GMT: %IP_VFR-4-FRAG_TABLE_OVERFLOW: GigabitEthernet0/1: the fragment table has

[c-nsp] Prevent DDoS

Hello, Is there anyway to prevent DDoS attack on Cisco Router? regards, Tseveen. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: [c-nsp] Prevent DDoS

Really appreciated all you guys. To sharing your knowledge, experience and advices. On 3/14/2011 8:23 PM, Jon Lewis wrote: recently did a little write-up on one method for this, BGP triggered real time blackhole routi ___ cisco-nsp mailing list c

[c-nsp] NAS-Port attribute on C3825-IPVOICEK9-M

Hello, I'm trying to configure simultaneous-use on my RAS. I'm using following FreeRADIUS 2.1.8 Cisco 3825 Version 12.4(15)T9, RELEASE SOFTWARE (fc5) The problem is NAS-Port is always zero. I've configured radius-server attribute nas-port format b and d but all users port is zero or ten. Yo

[c-nsp] PPPoE passthrough

Hello, I'm trying to configure PPPoE passthrough over Cisco 871 and PPPoE user contact to NAS. The topology looks like below PPPoE user >> Cisco 871 >> Cisco 3825 The PPPoE already configured and working fine on Cisco 3825 but I do not know how the PPPoE user make PPPoE connection to Cisco 3

[c-nsp] PPPoE pass through over router

Hello, I have configured NAS on my network but I need to configure network PPPoE over Routed network. Topology looks like below. PC1 Cisco 871 router1 >> NAS << Cisco 871 router2 << PC2 Is there anyway to configure PC1 and PC2 make PPPoE connection over Cisco 871 router1

Re: [c-nsp] PPPoE server on Cisco 871

Chris -Original Message- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Tseveendorj Ochirlantuu Sent: 30 juin 2011 02:38 To: cisco-nsp@puck.nether.net Subject: [c-nsp] PPPoE server on Cisco 871 Hello, I'm trying to configure PPPoE serve

[c-nsp] SNMP OID of 3825 router

Hello, How do I know logged user on 3825 by SNMP ? Really appreciate for any help. Sincerely, Tseveen. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail

[c-nsp] 3825 memory issue

Hello, I'm using 3825 router to provide internet for ADSL customers. Last week I configured policy-map to provide different bandwidth usage. Since this time my routers memory usage goes up. border-r#sh processes memory sorted allocated Processor Pool Total: 143619888 Used: 118621160 Free:

Re: [c-nsp] 3825 memory issue

show processes --- On Wed, 6/17/09, Tseveendorj wrote: From: Tseveendorj Subject: [c-nsp] 3825 memory issue To: cisco-nsp@puck.nether.net Date: Wednesday, June 17, 2009, 6:12 AM Hello, I'm using 3825 router to provide internet for ADSL customers. Last week I configured policy-map t

[c-nsp] Need help on IOS

Hello, Can you provide me below IOS please. c3825-ipbasek9-mz.124-24.T.bin If someone have this IOS please send me by email tseveendorj2...@yahoo.com or assign my CCO account named otseveendorj without access privilege any resources of Cisco. Then I really appreciate. Thank you. Tseveen.

[c-nsp] about duplex

Hello, I was reading about duplex need to find which one is give me good bandwidth and what is this. I have question about it. How to configure duplex on router and switch port ? These 2 ports are connected each other. How do I troubleshooting duplex ? I saw router and switches log but noth

[c-nsp] sh ip interface brief

Hello, I have never seen interface named NVI0. What is this NVI0? router#sh ip interface brief Interface IP-Address OK? Method StatusProtocol GigabitEthernet0/0 x.x.x.x YES NVRAM upup GigabitEthernet0/0.1 x.x.x.xYES

[c-nsp] NAS on c3825

Dear all, I have cisco 3825 router is playing NAS role. But something wrong with RADIUS. I have customer under VLAN10 and 11. 3825 sends NAS-Port attribute with value 10 and 11 when the customer authenticating. It is denied Simultaneous-Use function. How do I solve this ? Best regards, Tsev

[c-nsp] jumbo frame over the VLAN

Dear all, Is it possible connection between MD3000i SAN and ESXi 4.0 with jumbo frame over VLAN. Because I have only one Cisco 3560-E switch. Best regards, Tseveen ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman

[c-nsp] Problem on AS5350XM

Dear guys, We want to do prepaid calling card service and termination on one AS5350XM. Already connected to PSTN and ISDN. The problem is when I call from PSTN regular phone to our special number, I can hear no signal but the call duration counts on, seems like call is made. Actually we can't he

[c-nsp] SYS-3-MGDTIMER

Hi, I found the error message from log file of AS5350. May 6 03:56:25.476: %SYS-3-MGDTIMER: Uninitialized timer, timer stop, timer = 6879AB1C. -Process= "ISDN", ipl= 0, pid= 66, -Traceback= 0x60494E20 0x605D0098 0x600AF2F4 0x600A1FD8 0x600FB3A8 What is it? bug or error? Regards, Tseveen. ___

[c-nsp] strange log on AS5350XM

annelized E1/PRI ports 24 DSPs, 384 Voice resources 512K bytes of NVRAM. 125440K bytes of ATA External CompactFlash (Read/Write) Configuration register is 0x2102* What does it mean ? How to solve this problem ? Thank you Best regards, Tseveendorj ___ cis

[c-nsp] ISDN related errors

use i = 0x82FF - Interworking error; unspecified Cause i = 0x82FF - Interworking error; unspecified 5. Cause i = 0x8AAA - Switching equipment congestion Cause i = 0x8AAA - Switching equipment congestion Thank you Best regards, Tseveendorj ___ cisc

[c-nsp] Q.931 disconnect problem

Hi guys, This gateway used for call terminating. I have found following log on my gateway. These are come from debug isdn q931. part of entire log: Cause i = 0x8290 - Normal call clearing Cause i = 0x809E - Response to STATUS ENQUIRY or number unassigned Cause i = 0x809E - Response t

[c-nsp] Fans: "monitor dropped"

Hi I would like to know what does following log ? Environmental monitor experienced the following events: Fans: "monitor dropped" at 14:08:28 GMT Fri Aug 8 2008. Fans: "monitor dropped" at 14:09:28 GMT Fri Aug 8 2008. Fans: "monitor dropped" at 14:10:28 GMT Fri Aug 8 2008. Fans: "

[c-nsp] RTP related question

Hi I couldn't imagine how to test RTP between 2 points. How do I know remote RTP ports open? Sincerely, Tseveen ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pi

[c-nsp] RTP port

Hi, If is it possible to choose RTP port on AS5350XM? for example: don't use all ports 16000-6 on gateway. Only use between 16000-17000. Sincerely, Tseveen. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listin

[c-nsp] dial-peer related question

Hi guys I have 5350 gateway and gateway connected to internet via gigenthernet, connected to ISDN by 2 E1 ports via PRI. Dial peer looks like this : dial-peer voice 4002 voip voice-class codec 1 session target ipv4:61.250.94.66 incoming called-number 0301T dtmf-relay rtp-nte h245-signal h24

[c-nsp] ISDN Q.931 related question

Hi I found a lot of messages from AS5350 gateway. Call awarded and being delivered in an established channel The reason: The user is assigned an incoming call that is being connected to an already-established call channel. Question: 1. Why the call being connected to an established channel ? 3

Re: [c-nsp] PPPoE related question

Thank you very much. Christoph Loibl Oliver Boehmer Regards, Tseveen. On Sun, Mar 22, 2009 at 4:50 PM, Oliver Boehmer (oboehmer) < oboeh...@cisco.com> wrote: > Tseveendorj <> wrote on Sunday, March 22, 2009 09:06: > > > Hello, > > > > I'm trying to

[c-nsp] fax configuration

Dear Sir/Madam, My question is very elementary for someone who has good knowledge about it. I have Cisco AS5350XM gateway with (Cisco IOS Software, 5350 Software (C5350-IS-M), Version 12.4(20)T1, RELEASE SOFTWARE (fc3)) software. I'm trying to configure fax on our gateway like follow call flow. F

[c-nsp] L2TP issue on c2801

Hello, I'm trying to connect my branch office to head quarter with L2TP. We are renting 3G modem for L2TP from Mobile operator. When I'm dialing from 3G modem to LAC through LNS but I've got the following error on my c2801. *Dec 30 07:43:45.267 UTC: VPDN Received L2TUN socket message *Dec 30 07:

[c-nsp] how many VPN user support

Hello, How many *simultaneous user support for L2TP VPN by default on Cisco 2801 ? * *How do I know ?* * * Sincerely, Tseveen ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.

[c-nsp] PPPoE server on Cisco 871

Hello, I'm trying to configure PPPoE server on Cisco 871 with 12.4(15)T5 IOS version. *Topology is looks like below* PC ---> Switch > Cisco 871 router *My PPPoE related configuration is below * aaa authentication ppp default local aaa authorization network default local username pppuser

[c-nsp] Log message UTIL-3-TREE

Hello, I'm using AS5350XM gateway. I found strange message from log. Sep 8 20:45:03.940 GMT: %UTIL-3-TREE: Data structure error--attempt to reference an uninitialized wavl tree, -Traceback= 0x6049D34C 0x624385A8 0x60A51FE8 0x60C9B6A8 0x60C2AB50 0x60C2B344 Sep 8 20:46:03.944 GMT: %UTIL-3-TREE:

[c-nsp] Fax support on AS5350

Hi all, How do I know does AS5350 support fax ? IOS version Cisco IOS Software, 5350 Software (C5350-IS-M), Version 12.4(20)T1, RELEASE SOFTWARE (fc3) Any help will be appreciated. Regards, Tseveen. ___ cisco-nsp mailing list cisco-nsp@puck.nether.ne

[c-nsp] Bandwidth shape on OSI Layer2

Dear all, How to make a bandwidth shape with upload and download side on Cisco 3750 Catalyst at OSI Layer2 ? Best regards, ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.ne

[c-nsp] Fax on AS5350

Dear Sir/Madam, I'm trying to configure fax originating from our partner and terminating to PSTN network through our gateway. Fax -> Partnet gateway -> our gateway --> PSTN --> Fax How to configure fax on AS5350XM gateway ? Best regards, Tseveen _

[c-nsp] VPN IPsec and NAT

Hello I'm new to site to site IPsec VPN and also ASA 5505 firewall. My site to site IPsec VPN tunnel established between SiteA to SiteB. And can ping IP behind firewall. Now I need to Site A is VPN one end Site B is VPN other end Site C is VPN other end IP1 is located outside of Site B. SiteA

[c-nsp] PAT on Interface

Hello, I'm trying to PAT if source come from OUTSIDE interface to T interface address and also from OUTSIDE to OUTSIDE interface address OUTSIDE and T interface have same security-level 0 my ASA using 9.2 software and IPsec VPN configured First one is NAT exempt nat (inside,outside) source stat