Hello,
I'm trying to PAT if source come from OUTSIDE interface to T interface
address and also from OUTSIDE to OUTSIDE interface address
OUTSIDE and T interface have same security-level 0
my ASA using 9.2 software and IPsec VPN configured
First one is NAT exempt
nat (inside,outside) source
Hello
I'm new to site to site IPsec VPN and also ASA 5505 firewall.
My site to site IPsec VPN tunnel established between SiteA to SiteB. And
can ping IP behind firewall. Now I need to
Site A is VPN one end
Site B is VPN other end
Site C is VPN other end
IP1 is located outside of Site B.
SiteA
Hello,
How many *simultaneous user support for L2TP VPN by default on Cisco 2801 ?
*
*How do I know ?*
*
*
Sincerely,
Tseveen
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
Hello,
I'm trying to connect my branch office to head quarter with L2TP. We are
renting 3G modem for L2TP from Mobile operator.
When I'm dialing from 3G modem to LAC through LNS but I've got the following
error on my c2801.
*Dec 30 07:43:45.267 UTC: VPDN Received L2TUN socket message xCRQ -
Dear Sir/Madam,
My question is very elementary for someone who has good knowledge about it.
I have Cisco AS5350XM gateway with (Cisco IOS Software, 5350 Software
(C5350-IS-M), Version 12.4(20)T1, RELEASE SOFTWARE (fc3)) software. I'm
trying to configure fax on our gateway like follow call flow.
Dear Sir/Madam,
I'm trying to configure fax originating from our partner and terminating to
PSTN network through our gateway.
Fax - Partnet gateway - our gateway -- PSTN -- Fax
How to configure fax on AS5350XM gateway ?
Best regards,
Tseveen
Dear all,
How to make a bandwidth shape with upload and download side on Cisco 3750
Catalyst at OSI Layer2 ?
Best regards,
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
Hi all,
How do I know does AS5350 support fax ?
IOS version
Cisco IOS Software, 5350 Software (C5350-IS-M), Version 12.4(20)T1, RELEASE
SOFTWARE (fc3)
Any help will be appreciated.
Regards,
Tseveen.
___
cisco-nsp mailing list
Thank you very much.
Christoph Loibl
Oliver Boehmer
Regards,
Tseveen.
On Sun, Mar 22, 2009 at 4:50 PM, Oliver Boehmer (oboehmer)
oboeh...@cisco.com wrote:
Tseveendorj wrote on Sunday, March 22, 2009 09:06:
Hello,
I'm trying to do PPPoE on c3825 router but I faced VPDN related
Hi
I found a lot of messages from AS5350 gateway.
Call awarded and being delivered in an established channel
The reason:
The user is assigned an incoming call that is being connected to an
already-established call channel.
Question:
1. Why the call being connected to an established channel ?
Hi guys
I have 5350 gateway and gateway connected to internet via gigenthernet,
connected to ISDN by 2 E1 ports via PRI.
Dial peer looks like this :
dial-peer voice 4002 voip
voice-class codec 1
session target ipv4:61.250.94.66
incoming called-number 0301T
dtmf-relay rtp-nte h245-signal
Hi,
If is it possible to choose RTP port on AS5350XM?
for example: don't use all ports 16000-6 on gateway. Only use between
16000-17000.
Sincerely,
Tseveen.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Hi
I couldn't imagine how to test RTP between 2 points. How do I know remote
RTP ports open?
Sincerely,
Tseveen
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
Hi
I would like to know what does following log ?
Environmental monitor experienced the following events:
Fans: monitor dropped at 14:08:28 GMT Fri Aug 8 2008.
Fans: monitor dropped at 14:09:28 GMT Fri Aug 8 2008.
Fans: monitor dropped at 14:10:28 GMT Fri Aug 8 2008.
Fans:
Hi guys,
This gateway used for call terminating. I have found following log on my
gateway. These are come from debug isdn q931.
part of entire log:
Cause i = 0x8290 - Normal call clearing
Cause i = 0x809E - Response to STATUS ENQUIRY or number unassigned
Cause i = 0x809E - Response
Hi Guys,
I have found following error message on my AS5350XM
*Jun 24 03:37:58.710: %SYS-3-MGDTIMER: Uninitialized timer, timer stop,
timer = 687FB3E8. -Process= ISDN, ipl= 0, pid= 66, -Traceback= 0x60494E20
0x605D0098 0x600AF2F4 0x600A1FD8 0x600FB3A8
Jun 24 03:48:37.334: %SYS-3-MGDTIMER:
Hi,
I found the error message from log file of AS5350.
May 6 03:56:25.476: %SYS-3-MGDTIMER: Uninitialized timer, timer stop, timer
= 6879AB1C. -Process= ISDN, ipl= 0, pid= 66, -Traceback= 0x60494E20
0x605D0098 0x600AF2F4 0x600A1FD8 0x600FB3A8
What is it? bug or error?
Regards,
Tseveen.
Dear guys,
We want to do prepaid calling card service and termination on one AS5350XM.
Already connected to PSTN and ISDN. The problem is when I call from PSTN
regular phone to our special number, I can hear no signal but the call
duration counts on, seems like call is made. Actually we can't
18 matches
Mail list logo