Hi All
Has anyone gotten the facts straigh about the diffrences between these two?
Seems like cisco donĀ“t what too have them in a table next too each
other if it showes more then CPU speed etc etc.
Where looking to build a few Edge machines and trying too figure out
if the CXL is actually any be
> The 7600 doesn't allow traffic shaping unless you are using an OSM or
> SIP module, which isn't the case here if he is using DFCs on line
> cards. I think what you posted may be pertinent to the GSRs which had
> some odd functionality as well when it came to ingress/egress shaping
> with the dis
Hi
We are trying too police in a 7600 on the output on a Te interface.
After some fiddling I must ask, is there a workaround for the cir *
DFCs problem.
There is no need for high precision, just a rough working sollution.
Best regards
Mattias Gyllenvarg
Skycom AB
___
Hi All
I have a new stack of 2x 3750-12s that was recently stacked.
We just noticed packet loss there and as part of the troubleshooting
we powered of the second switch as the below was flooding the log. (no
connections in it yet)
*Nov 21 20:57:52.834: %STACKMGR-6-STACK_LINK_CHANGE: Stack Port 1
How about mac addresses are always in the same format and always lower case?
That one is enough too make me fart blood!
//Mattias Gyllenvarg
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive
Hi All
Why is it that when you restart a 7600 or 6500 the "route-reflector
client" statment is erased from the config?
Highly frustrating feature too troubleshoot over the phone
Anyone else have this?
What can I do to make this "more" permanent?!?
Best Regards
Mattias Gyllenvarg
Omnitron
_
I have done this (though without encryption) with 1801W units in both ends.
Required some creative routing but works well when all is done.
You will offcourse get a lower MTU then before.
Best regards
Mattias Gyllenvarg
Skycom AB
> A customer of ours has two sites, one with an 1800 the other wit
Hi all
Im looking too limit a 10Ge too ~3Gb using policing.
Platform is 650X/760X Sup32 10Ge PFC3 MSFC 2A.
Is this possible at these speeds?
Any experience too share?
Best regards
Mattias Gyllenvarg
Skycom AB
___
cisco-nsp mailing list cisco-nsp@puck.
Hi all
We have an issue we cant find any reference too.
We have a 3560G that gets a "ip pim spare-mode" mutlicast feed.
There is a Vlan X on the switch with a few access ports.
When a join comes from one of these ports all ports in the vlan are flooded.
We have tried several IGMP SNOOPING config
Hi
We just noticed that our 76XX and problably out 65XX machines dont log
interface Up or down messages.
They all have "logging buffered 64000 debugging".
Could not find a matching bug at cisco.com.
Has anyone seen this?
Best Regards
Mattias Gyllenvarg
Omnitron
Sweden
_
to the routing part of TCAM and some packets are
beeing software switched.
ivan
On Wednesday 12 September 2007, christian wrote:
> whats the output of sho proc cpu sorted 5min look like?
>
>
>
> On 9/11/07, Wyatt Mattias Ishmael Jovial Gyllenvarg <
>
> [EMAIL PROTECTED]>
Hi all
We have a strange behavior on a 3560G that is running IBGP + some EBGP.
It is a route-reflector client to our one core machine and it takes in
a few EBGP peers.
Now we want a certain set of prefixes to go another way then the core
node calculates as "best".
We there for setup a peer with
12 matches
Mail list logo