Hi,
i want to use advertise best external- feature on my BGP EDGE routers.
*Cisco 1006 is used as the "backup" router for the international traffic.
*Cisco 1006 best routes are are received over iBGP session.
I want to advertise best external routes to the other EDGE router.But my
BGP session is
Hi,
I have problem with 2x10Gbps lacp on Cisco Asr1006.
Ports are on different SIP's.are there any limitations that i am not aware
of?
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at ht
Hi,
I had one strange situation where while performing RSP switchover i
completely lost data plane.
SSO/NFS enabled on router, NSF enabled on neighboring routers.
Cisco Version 15.3(3)S6
show ip ospf
Non-Stop Forwarding enabled
Global RIB has not converged yet << ???
IETF NSF helper s
ed this or tried in the lab.
> -has anyone seen this type of behaviour on a rush network where multiple
> updates and withdraws take place in a 30s interval do you actually see this
> update pacing in effect please?
>
>
> adam
>
> > -Original Message-
> > Fr
Hi,
We have two bgp routers with full bgp table. All traffic is forced over
router EDGE1(from EDGE2 and "internal" router).
When i shutdown the "upstream link" on EDGE1 all the traffic is rerouted to
EDGE 2 router, but i see 15sec complete outage. (the path the end system
takes in "internal route
Hi,
No:). This is internal service, and we do not need/don't want any
bandwidth limitation...
On Thu, Oct 16, 2014 at 11:11 AM, Mark Tinka wrote:
> On Thursday, October 16, 2014 10:54:52 AM jure brkljacic
> wrote:
>
> > ->>downgrade to working version
> >
>
> Kind regards
> Sibbi
>
> On 15.10.2014 14:14, "Holger L" wrote:
>
> >On Wed, October 15, 2014 15:47, jure brkljacic wrote:
> >> Is this service policies a dummy one,permiting everything?
> >>
> >> Can you be pleaae so kind and share the s
Hi,
Thanks for help. I do not have the access to BGP router (the "picture" from
the first mail)
IPv4 broadcast should be working. ARP resolution OK, IP reachability OK,
BGP neighbor OK.
How to check if IPv4 multicast is working in both directions without the
access to BGP router?
On Tue, Oct 14,
Hi,
We have a problem with IPv6 traffic over xconnect between two directly
connected C7606 MPLS routers
ASR1k(IPv4/IPv6) ---MPLS#1MPLS#2--BGP router(IPv4/IPv6)
All interfaces are 10G
a.) IPv4 is working without any problems
b.) IPv6 is not working
->>Linecards used on 7606 r
00 0 0 0 0
On Wed, Aug 27, 2014 at 1:06 PM, jure brkljacic wrote:
> Hi,
>
> Please find the required information
>
> router_2#show platform aspdma all_counters 0
> RxQ Pkts Bytes ixBytes buffail refltry reflfail
> service internal
> exit
>
>
> adam
>
> > -Original Message-
> > From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of
> > jure brkljacic
> > Sent: Tuesday, August 26, 2014 1:50 PM
> > To: cisco-nsp@puck.nether.net
> > Subjec
ers om radio and serial links.
>
> Jon Harald Bøvre
> ------
> Fra: jure brkljacic
> Sendt: 26.08.2014 14:03
> Til: cisco-nsp@puck.nether.net
> Emne: [c-nsp] ME3600 BFD flapping
>
> Hi,
>
> We have a huge problems with BFD flapping on ME
Hi,
We have a huge problems with BFD flapping on ME3600.It`s random event on
two 3600 connected to the "same" end system.
a.) First we thought that interface output drops causing BFD flapping.Than
we configure a
a output queue policy to eliminate interface output drops. BFD
flapping still th
Hi,
Are object-gropus not supported with ABF?
RP/0/RSP0/CPU0:XXX(config-ipv4-acl)#permit tcp net-group X-USERS any
port-group X-PORTS ?
ack Match on the ACK bit
capture Capture matched packet
dscp Match packets with given DSCP value(s)
established Match established
Hi,
Thanks for answer. TAC case is opened already, and just for information we
are running 4.3.2
Br
Jure
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermai
Hi,
we are constantly getting this error:
LC/1/2/CPU0:Jan 17 10:27:37.591 : l2fib[243]:
%PLATFORM-PLAT_L2FIB-6-HW_INIT_INFO : Failed to init Platform HAL Layer :
'prm_server' detected the 'warning' condition 'An operation that was
requested was aborted - data integrity may be compromised.' (11657
nd VRFs
>> though I'm not sure how it works with the finite memory amount on the
>> parent
>> card.
>>
>>
>> adam
>> -Original Message-----
>> From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of
>> jure
>>
Hi,
We want to implement nV Clustering functionality for two ASR 9k`s. Any pros
and cons?
We meet all the requirements (line cards,etc...) and we do not need CGNfeature.
Any information will be useful
___
cisco-nsp mailing list cisco-nsp@puck.nether.ne
email and delete all copies of this message.
>
> For corporate legal information go to:
> http://www.cisco.com/web/about/doing_business/legal/cri/index.html
>
>
>
> From: jure brkljacic
> Date: Thursday, November 7, 2013 12:29 AM
> To: "cisco-nsp@puck.nether.net&qu
Hi,
We have notice some strange logs on Cisco ME3600 running
->>me360x-universalk9-mz.153-1.S1.bin
Oct 7 15:39:45.955 cet: Unimplemented Function: local_port_ucast_supp_level
Oct 7 15:45:52.523 cet: Unimplemented Function: local_port_ucast_supp_level
Oct 7 15:51:45.071 cet: Unimplemented Funct
20 matches
Mail list logo