It looks like both slots need to be populated.
>
>
> -Original Message-
> From: cisco-nsp-boun...@puck.nether.net
> [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of David Rothera
> Sent: Tuesday, December 14, 2010 12:26 PM
> To: Jay Nakamura
> Cc: cisco-nsp
&
e both slots need to be populated.
>
>
> -Original Message-
> From: cisco-nsp-boun...@puck.nether.net
> [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of David Rothera
> Sent: Tuesday, December 14, 2010 12:26 PM
> To: Jay Nakamura
> Cc: cisco-nsp
> Subject: Re: [c-nsp] 2951 me
: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of David Rothera
Sent: Tuesday, December 14, 2010 12:26 PM
To: Jay Nakamura
Cc: cisco-nsp
Subject: Re: [c-nsp] 2951 memory upgrade to 2GB/Boot loader
Hope you got her name to use when you have to raise a case for a
On 12/14/10 10:09 AM, Jay Nakamura wrote:
> Just a side note so I can vent, just talked to TAC and the lady
> suggested to boot with the old RAM and swap it while the router was
> powered on
>
I hope you didn't pay too much on the smartnet for that suggestion.
The only time I've seen the pro
Hope you got her name to use when you have to raise a case for a dead 2951 :P
On 14 Dec 2010, at 18:09, Jay Nakamura wrote:
> Just a side note so I can vent, just talked to TAC and the lady
> suggested to boot with the old RAM and swap it while the router was
> powered on
>
> On Mon, Dec 13
Just a side note so I can vent, just talked to TAC and the lady
suggested to boot with the old RAM and swap it while the router was
powered on
On Mon, Dec 13, 2010 at 11:38 PM, Jay Nakamura wrote:
> I was having problems upgrading memory in a ISR G2 2951 from two 512M
> DIMMs to one 2GB DIMM.
I was having problems upgrading memory in a ISR G2 2951 from two 512M
DIMMs to one 2GB DIMM. Neither of the DIMM I had worked so I started
to think I may need to upgrade ROMMON/boot loader. But for the life
of me, I could not find any release notes on cisco.com for it
anywhere. There is newer re