Hello, We have a couple Catalyst 6800 with Sup-2T modules positioned as redundant PE devices. The gigabit ports on the supervisor module are running LDP upstream to ASR1000s. I seem to be hitting a roadblock when trying to work out a queuing strategy. Documentation suggests that with the gigabit ports enabled the module only supports CoS based queuing but I'm having a hard time figuring out how to queue and set the EXP bit on egress.
I've tried the examples below but seem to be hitting a wall, I'm wondering if I'm running into a limitation for these particular ports or more of a platform limitation. I've opened a TAC case but they have been incredibly unhelpful as of yet. class-map match-any COS5 match cos 5 policy-map PHY-OUT class COS5 set mpls experimental topmost 5 6800-1(config-if)#service-policy output PHY-OUT Match cos is not supported for this interface in the output direction 6800-1(config)#policy-map type lan-queuing PHY-OUT DEVGRU-RDD-CR1(config-pmap)#class DEVGRU-RDD-CR1(config-pmap)#class COS5 6800-2(config-pmap-c)#? !no 'set' command available QoS policy-map class configuration commands: bandwidth Bandwidth exit Exit from QoS class action configuration mode no Negate or set default values of a command priority Strict Scheduling Priority for this Class queue-buffers queue buffer queue-limit Queue Max Threshold for Tail Drop random-detect Enable Random Early Detection as drop policy service-policy Configure QoS Service Policy shape Traffic Shaping <cr> Any help or advice would be greatly appreciated. Thanks, Mitch Dyer _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/