Hi,
If in the same class-map, i match DSCP value and also MPLS EXP value, how
the PE-1 Router choose?
The class-maps are evaluated sequentially
If it's defined as match-any (default) the first positive match will result
in the end of evaluation process
If it's defined as match-all than both
Yes, you are right, now my big concern is that if one packet have one DSCP
value, then after transfer through the MPLS network (deploy the MPLS EXP QOS in
the MPLS network) the output packet will attach the same DSCP value or not?
Thanks and regards,
Xu Hu
On 11 Jul, 2012, at 16:54, adam
On (2012-07-11 18:06 +0800), Xu Hu wrote:
Yes, you are right, now my big concern is that if one packet have one DSCP
value, then after transfer through the MPLS network (deploy the MPLS EXP QOS
in the MPLS network) the output packet will attach the same DSCP value or not?
Both are
, Conform
and Un-conform
adam
-Original Message-
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Saku Ytti
Sent: Wednesday, July 11, 2012 12:19 PM
To: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] ASR9000 MPLS QOS Issue
On (2012-07-11 18:06
Hi Team,
Recently test the QOS in MPLS network occur one issue.
CE---PE-1PPE-2CE.
CE and PE just running static route, PE and P running OSPF for IGP, MP-BGP,
then also LDP and MPLS/TE auto-tunnel.
In the input direction of PE-1 towards CE side, i match the DSCP value CS6,
then reset