If you do a search on Ethernet Manual Cross-connects you'll find
some information on manually connecting an Ethernet port to an outgoing
STS circuit.
Phil
On Apr 13, 2007, at 8:37 AM, Aaron Daubman wrote:
Greetings,
I'm looking to provision circuits between two or more ONS15454s - CTC
Phil,
If you do a search on Ethernet Manual Cross-connects you'll find
some information on manually connecting an Ethernet port to an outgoing
STS circuit.
Thanks for the tip. Searching as you described seems to return
results which all sum up to the following:
ONS 15454s require
Phil,
Thanks again - that page was a bit more complete than the others I
found. However, it still seems it is impossible to cross-connect the
CE-1000-4 with a non-cisco device.
You basically create the Ethernet circuit, but the destination is going
to be the same node and the slot is going to