This has to do with the granularity of the ME-3400 hardware for the shaping
action.
There is a formula for port shaping ( 1 - 16/N ) * rate, where N is from 17 to 64K, that can give you all the possible
values (rate is the interface speed). As you can see from the formula, you have awful granu
Hi,
There are different shape rates supported if service-policy attached
to a port operating at different physical speed. I assume that ports
of your switch don't operate at the same speed.
Ivan
On Wednesday 07 October 2009, Pavel Skovajsa wrote:
> Hello all,
>
> I was in the middle of the c
Hello all,
I was in the middle of the configuration of ME-3400-24TS-A
(12.2(50)SE1) for port-shaping and run into interesting message:
censw(config-if)#!
censw(config-if)#!
censw(config-if)#interface FastEthernet0/12
censw(config-if)#service-policy output UNI-out-internet-1024kbps
censw(config-if