Is that an EtherSwitch "Network" module or "Service" module? They are
very different beasts. I'd imagine that you were using the Network
module and that the problem could have been avoided with a Service module.
http://tinyurl.com/2ok8ox
The Service module literally acts as an independent sw
Hi,
I have narrowed the problem. Now EoMPLS is working between the two
routers - the change is that instead of connecting CE2 to the
EtherSwitch module of C3845, I have connected it on an external 2950
switch which is then dot1q trunked to C3845. The problem appears when
I connect the host on the
Can you load 12.4(15)T6 on the 3845?
There was a bug with L2TPV3 where the interface didn't go
in to promiscous mode to accept the frames so it would
look like a one way PW.
Check 'sh ip int' or 'sh controller' on the 3845.
The outging interface does look odd too.
Rodney
On Thu, Aug 07, 2008 a
Interesting, AFAIK 38xx series didnt support MPLS L2VPN (CMIW).
ATOM only supported for the 72xx platform and above while VPLS only
supported on 76xx and above.
to be honest with you i never test it on 38xx but the interesting things
that
VC on both side showing up :) but with some odd result o
Hi,
I am trying to make EoMPLS (VLAN mode) to work between a 7206VXR
(NPE400) running c7200-jk9s-mz.123-21.bin and a 3845 running
c3845-advipservicesk9-mz.124-15.T.bin. These two PE routers are
connected back-to-back via FastEthernet. The customers are connected
via a switch connected to each PE:
