Need to change the bandwidth statement in the DSU line item config (up-ing
the available bandwidth for a fractional DS3), for a router placed remotely
from my office. Lacking an off-band access to this router, I am wondering
if that change would trigger a circuit connectivity drop, and if so, if
On Mon, 8 Dec 2014, papaia wrote:
Need to change the bandwidth statement in the DSU line item config (up-ing
the available bandwidth for a fractional DS3), for a router placed remotely
from my office. Lacking an off-band access to this router, I am wondering
if that change would trigger a
On Mon, Dec 08, 2014 at 07:26:18AM -0600, papaia wrote:
Need to change the bandwidth statement in the DSU line item config (up-ing
the available bandwidth for a fractional DS3), for a router placed remotely
from my office. Lacking an off-band access to this router, I am wondering
if that
On Mon, Dec 8, 2014 at 8:58 AM, Pierre Emeriaud petrus...@gmail.com wrote:
2014-12-08 14:49 GMT+01:00 Justin M. Streiner strei...@cluebyfour.org:
If you're referring to anything under the T3 controller config itself (if
the module you're using has that), that will probably need remote
On Mon, 8 Dec 2014, Papi wrote:
dsu bandwidth ...
statement at my end? Shouldn't that be always the entire DS3 (44210), with
the provider shaping it accordingly, behind our CE-PE connection (this
goes into an MPLS cloud)? Or is the expectation that both the provider and
I are to set the dsu
2014-12-08 14:49 GMT+01:00 Justin M. Streiner strei...@cluebyfour.org:
If you're referring to anything under the T3 controller config itself (if
the module you're using has that), that will probably need remote hands
because there is a chance that those config changes will cause the link to
, December 08, 2014 8:59 AM
To: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] Fractional DS3, dsu bandwidth statement and circuit
interruption
On Mon, Dec 08, 2014 at 07:26:18AM -0600, papaia wrote:
Need to change the bandwidth statement in the DSU line item config
(up-ing the available
