What's the best IOS to use on a 7206vxr NPE-G1 with 1G Ram, to terminate PPPoE on LT2tpv3 tunnels into MLPPP bundles?
We're currently running 12.2(16)B on this box, and terminating sessions just fine. MLPPP performance on DSL/PPPoE sessions is horrible, however. I suspect it's related to a log message concerning mlppp packets being forwarded to the wrong interface. I'm trying to get the exact message, but the customer apparently has their cpe router off. The cpe device in use is currently a 2610 with two ADSL wics running a 12.2 ip plus image. I've got a 2651xm coming with a 12.3 ip plus image to see if it works better. Any help is appreciated. Here's the 7206 virtual template config- interface Virtual-Template2 mtu 1492 ip unnumbered FastEthernet0/0 peer default ip address pool default ppp authentication chap pap ppp chap hostname c7206-2 ppp multilink and the 2600 cpe config- interface Multilink1 no ip address ppp multilink ppp multilink group 1 ! interface ATM0/0 no ip address no atm ilmi-keepalive dsl operating-mode auto hold-queue 224 in ! interface ATM0/0.1 point-to-point pvc 8/35 pppoe-client dial-pool-number 2 ! interface Dialer2 ip address negotiated ip mtu 1492 ip nat outside encapsulation ppp load-interval 30 dialer pool 2 dialer load-threshold 1 outbound dialer-group 2 ppp max-bad-auth 3 ppp lcp predictive ppp lcp delay 1 ppp authentication pap ms-chap callin ppp chap hostname u...@domain.com ppp chap password 0 ******* ppp pap sent-username u...@domain.com password 0 ******* ppp multilink ppp multilink fragment disable ppp multilink links minimum 2 ppp multilink multiclass Thanks- Joe _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/