: Aaron; cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] PWHE vs BVI on Bridge Domain - l2vpn ios xr
On Thu, Jun 06, 2013 at 06:24:23PM -0400, Luis Anzola wrote:
Hi Aaron,
Take a look on the PWHE and BVI interface capabilities in terms of feature
set (qos, sec, routing, etc) and you will probably
From a previous post, I got curious about PWHE since I didn't know what it
was.
I looked at someone's config and read a little about it on cisco.com.
It seems that what I'm reading about PWHE and what I saw in a previous
config of a previous post, I've used a construct of l2vpn, bridge
Hi Aaron,
Take a look on the PWHE and BVI interface capabilities in terms of feature set
(qos, sec, routing, etc) and you will probably find the answer to your
question, e.g. QoS is not supported on BVI interfaces.
QoS on PWHE Interfaces:
IPv4 and IPv6 address-families are supported.
Policy
On Thu, Jun 06, 2013 at 06:24:23PM -0400, Luis Anzola wrote:
Hi Aaron,
Take a look on the PWHE and BVI interface capabilities in terms of feature
set (qos, sec, routing, etc) and you will probably find the answer to your
question, e.g. QoS is not supported on BVI interfaces.
QoS on PWHE