Hello,
did anybody see output below with SXH4 ? Why applying vlan can take a
few minutes ?
6503-lab-1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
6503-lab-1(config)#vlan 123
6503-lab-1(config-vlan)#end
% Applying VLAN changes may take few minutes. Please wait..
In lab
Hi,
On Wed, Dec 10, 2008 at 10:36:44AM +0100, David Granzer wrote:
did anybody see output below with SXH4 ? Why applying vlan can take a
few minutes ?
6503-lab-1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
6503-lab-1(config)#vlan 123
6503-lab-1(config-vlan)#end
%
hi,
maybe just covering themselves? The worst I've seen was a
few seconds - thats with just over 120 VLANs on a VTP domain
with 3 masters
alan
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
-nsp] SXH4 Applying VLAN changes may take few minutes
Hello,
did anybody see output below with SXH4 ? Why applying vlan can take a
few minutes ?
6503-lab-1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
6503-lab-1(config)#vlan 123
6503-lab-1(config-vlan)#end
% Applying VLAN
that with V1/V2.
Chuck
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David Granzer
Sent: Wednesday, December 10, 2008 4:37 AM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] SXH4 Applying VLAN changes may take few minutes
Hello,
did anybody see
David Granzer wrote:
6503-lab-1#sh vtp status | i Version|VTP Ope
VTP Version : 2
VTP Operating Mode : Transparen
I'm pretty sure the error is cosmetic, and can be ignored. Chuck is
probably half-right - I bet it's appeared because SXH/SXI have support
for
On Wed, Dec 10, 2008 at 03:10:31PM +, Phil Mayers wrote:
David Granzer wrote:
6503-lab-1#sh vtp status | i Version|VTP Ope
VTP Version : 2
VTP Operating Mode : Transparen
I'm pretty sure the error is cosmetic, and can be ignored. Chuck is
probably
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hey,
On Dec 10, 2008, at 1:46 AM, Gert Doering wrote:
Hi,
On Wed, Dec 10, 2008 at 10:36:44AM +0100, David Granzer wrote:
did anybody see output below with SXH4 ? Why applying vlan can take a
few minutes ?
6503-lab-1#conf t
Enter configuration
