Hello,
I have some trouble with VRF and route leaking unfortunately and wanted
some explanations or help if possible.
I have 2 VRFs (out of many other) between which I leak routes (all
routes currently).
I can't have them in one VRF unfortunately.
The problem:
Ex:
vrf aaa
rd 1:1
route-target
On Sun, 2008-01-13 at 10:28 +0200, Mihai Tanasescu wrote:
Hello,
I have some trouble with VRF and route leaking unfortunately and wanted
some explanations or help if possible.
I have 2 VRFs (out of many other) between which I leak routes (all
routes currently).
I can't have them in
On Sun, 2008-01-13 at 20:13 +0200, Mihai Tanasescu wrote:
Sorry for that..I wanted to avoid giving private information from my config.
That's understandable. But it's better to copy+paste and then
remove/replace the private things. :-)
My scenario only uses local VRFs (VRF-lite) so I thought
Peter Rathlev wrote:
Everything looks fine as far as I can tell. It could be a
software-problem. According to the Error Message Decoder, the variant
that mentions IP addresses is a software error:
1. %IP-3-LOOPPAK: Looping packet detected and dropped -\n
src=[IP_address],