Hi
Can the WS-X6748-SFP support MPLS on a 7600 chassis?
Regards
Marl
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
You didn't mention if is a DFC-equipped WS-X6748-SFP or not, but I
don't think it matters: the card doesn't have service capabilities
and will fall-back to PFC-based MPLS, which might satisfy your
requirements or not. No FlexWAN/OSM/ES20 services, just plain vanilla
MPLS.
Rubens
On Mon, Jul
?
Mark
- Original Message
From: Rubens Kuhl Jr. [EMAIL PROTECTED]
To: Mark Tech [EMAIL PROTECTED]
Cc: cisco-nsp@puck.nether.net
Sent: Monday, July 7, 2008 9:57:29 AM
Subject: Re: [c-nsp] WS-X6748-SFP 7600 MPLS
You didn't mention if is a DFC-equipped WS-X6748-SFP or not, but I
don't think
, 2008 11:15 AM
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] WS-X6748-SFP 7600 MPLS
Hi Rubens, thanks for the response. Currently I have not got the cards yet
so I cannot test myself. At the moment they are just plain cards with no
extra DPC cards, which is the cause of my concerns. I
- Original Message
From: JH Cockburn [EMAIL PROTECTED]
To: Mark Tech [EMAIL PROTECTED]
Cc: cisco-nsp@puck.nether.net
Sent: Monday, July 7, 2008 10:25:01 AM
Subject: RE: [c-nsp] WS-X6748-SFP 7600 MPLS
Hi Mark,
We have those (DFC-equipped) in our 7600's acting as P devices in our
Datacenter
Hi M,
Also make sure your IOS will support MPLS.ip-base image will not for
instance.
Cheers
_
From: Mark Tech [mailto:[EMAIL PROTECTED]
Sent: Monday, July 07, 2008 11:59 AM
To: JH Cockburn
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] WS-X6748-SFP 7600 MPLS
Hi, I don't
On Monday 07 July 2008 17:58:33 Mark Tech wrote:
Hi, I don't need anything special, I'm just wanting to
make sure that I can label switch on these plain cards
using RSP720's on a 7600 chassis as its not clear in the
Cisco docs that I've found. If not I'd like to know what
extra cards would
To: JH Cockburn
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] WS-X6748-SFP 7600 MPLS
Hi, I don't need anything special, I'm just wanting to make sure that I
can label switch on these plain cards using RSP720's on a 7600 chassis as its
not clear in the Cisco docs that I've found