Updated IOS on 2950 to EA10 and did auto qos on gigabit interface. Nothing
changed except that now I can change policy-map values and they are in
effect immediately. In old IOS I should have removed policy in interface
first and then apply it again.
Here is what I see (policy 800, burst 8192):
Hi,
> used to tune buffers on cisco device, including cat2950. I am going to play
> with it. But there is nothing about it in cisco documentation for 2950
> switches for 12.1(22)EA2 (this IOS version is used on my device) and older
> releases. That's strange.
EA10 is latest release . have you tri
Not sure, but hope it helps.
>
> Thanks,
> Josh
>
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Roman
> > Bestuzhev
> > Sent: Thursday, July 05, 2007 1:58 AM
> > To: cisco-nsp@puck.nether.net
> > Subject
Hello,
I'm trying to configure qos on 2950 to restrict speed for several users who
sit on 10/100 ports. For example for only 8Mb/s for traffic in direction to
the users. Testing tools are iperf and ftp/http downloads/uploads.
To achive this I configure my switch in the following way:
1. Configur