Hey Guys!
I created a video on CSC for instructing customers on taking PCM captures,
Packet captures and DS0 Dumps on the IOS routers.
Here's the link for this video. http://cs.co/6180BuNir
Please share this with people who can benefit from the video! These captures
can be used in troubleshooti
Dan: Good reference Been awhile since I've seen a VM cluster trying to
sync with the host
Anthony: Very good point [š]
I think the best way to stay in the good graces of UCOS NTP, IMO, is to use an
IOS device, synced to an S1 or S2 server via IP . everything else either
isn't support
On the topic of NTP and upgrades/migrations, I would advise to also watch out
for CSCur94973.
https://tools.cisco.com/bugsearch/bug/CSCur94973
- Dan
-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Anthony Holloway
Sent: Monday, November 16, 2015 11:20 AM
To:
Looks like you're all good now, but as a heads up to everyone else, don't
stop at checking NTP with "utils ntp status". You will fail to upgrade if
your NTP configuration has an FQHN for the NTP server which begins with a
digit.
E.g., 0.pool.ntp.org
You will not see the hostname in the output of
Take a look at this DOC. Search for āConfigure BLF Call Pickupā
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_0111.html
Thank you,
Neal Haas
From: Micha
This doc is a bit dated but describes BLF configuration in relevant detail:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612/cucmbe-rel_note-612_2.html#wp308676
When you press the BLF button in the alerting state (flashing amber), and you
hear the re
Neal,
Thanks for the response,That thought did cross my mind, the users
didn't want it that feature.
-Mike
Michael T. Voity
Network Engineer
University of Vermont
On 11/16/2015 10:19, Haas, Neal wrote:
Why donāt you configure it as a Line if you want to pick it up?
Thank you,
Neal
Why donāt you configure it as a Line if you want to pick it up?
Thank you,
Neal Haas
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Michael T. Voity
Sent: Monday, November 16, 2015 5:42 AM
To: voip puck
Subject: [cisco-voip] BFL Pickup button
Hello,
My system is CUC
Hello,
My system is CUCM 10.5.2.12900-14
I have 1 7962 (67522) that has 2 BLF buttons on it for 2 other phones,
7962 & 7942 phones, (67520 and 67521). The BLF works fine for when i
see them off hook and when I press the button to call them.
In the BLF config I clicked "Call Pickup"
On m