ss to help ?
Jeff
From: Ryan Huff [mailto:ryanh...@outlook.com]
Sent: Friday, April 8, 2016 8:00 AM
To: Jeffrey Girard
Cc: Sreekanth; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] H323 call rejection using Translation Profile not
working
Hi Jeff,
While I certainly would not want to usurp
That makes sense……
Thanks. I will take this up with my TELCO and confirm that is what is going on
From: Sreekanth [mailto:sknt...@gmail.com]
Sent: Friday, April 8, 2016 7:58 AM
To: Jeffrey Girard
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] H323 call rejection using Translation
s Disconnect Cause=0, Disconnect
Cause=0) <<<<<<<<<<<<<<<<<>>>CCAPI handed cid 5 with tag 0 to app "_ManagedAppProcess_Default"
<<<<<<<<<<<<<<<<<<<<mailto:sknt...@gm
All –
Playing around with call blocking using an H.323 gateway.
Gateway has an FXO port and it is configured as an H323 GW to a
CUCM.
Here is the code
voice translation-rule 1
rule 1 reject /1000/
exit
voice translation-profile ca
Nate -
Thanks for the reply.
Yes, see below
. Finally, I set the Enterprise Parameter "BLF for Call Lists"
to enabled.
From: NateCCIE [mailto:natec...@gmail.com]
Sent: Tuesday, December 1, 2015 8:29 PM
To: Jeffrey Girard;
All -
I have been lurking on this list for quite a while as I
continue to hone my collaboration skills.
CAVEAT: This is not a production system and is not for any
customer. This is my lab as I continue to try to learn.
CUCM v9
Desired endstate:
[mailto:amit3@gmail.com]
Sent: Monday, November 23, 2015 12:44 PM
To: Jeffrey Girard
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Caller ID shows as Unknown Number - until call is
answered
Hi Jeff,
When you say difference is connection play...then which port have connection
play
Also posted on Cisco Support Forum
CUCM 9.0.1.1-37 on ESX5.5
2811 Gateway with VIC2-4FXO
IOS version Adv Enterprise 15.1(3) T1
MGCP is used between gateway and CUCM
The issue: on one of the ports, Caller ID is not displayed on the phone until
after the call is answered. While ringing, the Ca
Log into the ELM of the cluster.
Under License Management (I think – I don’t have an ELM in front of me), there
will be a button for “Generate License Request File”).
That file will contain all the information about the current licenses.
You send that file to TAC and they will massage it (rehos
My client has implemented a system in which 2951 routers with E&M cards have
been used to extend what was essentially a 4 wire leased line circuit.
The system at either end of the IP cloud are connected using 4 wire modems.
One site is primarily a transmit site and the other is primarily a rece
I am setting up a classroom with 40 cisco devices (routers and switches) split
between 8 student pods.
I was doing some research and looking at OpenGear for remote / OOB Console
access.
Anyone have any experience or input?
---
10:07 PM
To: Jeffrey Girard
Subject: Re: [cisco-voip] Back to back E&M trunk config example
This may be irrelevant but your configuration references using "operation
4-wire" yet your E&M modified cable seems to only have 2 wires in use?
On Fri, Nov 21, 2014 at 3:02 PM, Jeff
Im trying to mock up a lab version of a customer's network. They are using E&M
cards to connect to some old computer based fire control systems that have
embedded modems.
Of course, I don't have access to any of these fire control computers to use in
the lab.
Therefore, my thought was to simp
IP Phone -> CUCM -> H323 gateway -> outbound dial peer that forwards no digits
-> FXO port -> FXS port (DN = 9997) -> dial-peer with no direct inward dial
command
My expectation is that when I dial 9997 that my call would be sent out the FXO
port, the FXS would go off hook, the port is matched
) 835-0458 (fax)
From: Jason Aarons (AM) [mailto:jason.aar...@dimensiondata.com]
Sent: Wednesday, October 01, 2014 1:13 PM
To: Jeffrey Girard; Ryan Ratliff (rratliff)
Cc: cisco-voip voyp list
Subject: RE: [cisco-voip] 7945 more button does nothing under ITL (can't delete
the ITL)
This i
Jason -
I just watched your video. Could it possibly be/have you
checked mechanical? Have you confirmed that the mechanical aspects of the
physical button is actually working? For example, at the beginning of your
video with the phone onhook, have you tried to press the "More"
Home Lab
I also posted this on the Cisco Support Forum for Small Business, but so far,
no one has even read it
This should be a very simple and straightforward process, but for some reason,
I am unable to make it work.
I factory reset a SLM248P
I have two laptops connected, one on port 1 and
o:jeffrey.gir...@wiremehappy.com>
(607)835-0406 (home office)
(845)764-1661 (mobile)
(607)835-0458 (fax)
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Jeffrey Girard
Sent: Wednesday, July 02, 2014 8:19 AM
To: Matthew Loraditch; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Why
appy.com<mailto:jeffrey.gir...@wiremehappy.com>
(607)835-0406 (home office)
(845)764-1661 (mobile)
(607)835-0458 (fax)
From: Matthew Loraditch [mailto:mloradi...@heliontechnologies.com]
Sent: Tuesday, July 01, 2014 11:15 PM
To: Jeffrey Girard; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Wh
This is a lab environment and my third round at doing a fresh install /
configuration of IM & P. CUCM 9 and IM & P 9.
Integration is complete and all diagnostics show green across the board.
There is no LDAP integration this time (I had done it before so I was
comfortable in how to do the inte
Fails at the same location with the same error when using DNS as well…
Jeff
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Jeffrey Girard
Sent: Wednesday, June 25, 2014 12:45 PM
To: mma...@tep.com; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Installing CUPS 9
m: mma...@tep.com [mailto:mma...@tep.com]
Sent: Wednesday, June 25, 2014 12:42 PM
To: Jeffrey Girard; cisco-voip@puck.nether.net
Subject: RE: Installing CUPS 9 Subscriber - fails on connectivity
Did you enable DNS on either of the servers upon install or are you strictly
using IP addressing?
From: cisc
Trying to install a CUPS subscriber in a lab environment. Version 9
CUPS publisher installed fine.
I started all the services on the Publisher and ran through the initial install
wizard
I added the subscriber to the Publisher under System -> Cluster Topology ->
DefaultCUPSubcluster
When I in
All -
This is my home lab - exploring the auto assign function
I have a simple CME configured using the auto assign function. However, the
auto assign only assigns a number to the primary line of a multi line phone.
Is there a way to get the function to assign a DN to every line on t
Coy –
That would be very helpful. I would appreciate the assistance if you
could provide me that information.
Thanks!
From: coy.h...@coyhile.com [mailto:coy.h...@coyhile.com]
Sent: Tuesday, May 20, 2014 2:41 PM
To: Jeffrey Girard
Cc: bmead...@vt.edu; Cisco VOIP (cisco-voip
, 2014 1:44 PM
To: Jeffrey Girard
Cc: Cisco VOIP (cisco-voip@puck.nether.net)
Subject: Re: [cisco-voip] Anyone using the Cisco 300 Series switches? Unable to
get Auto Voice VLAN to work
Do you have VLAN 30 defined under VLAN Management or just under the Voice VLAN
section? Make sure it's added
Im playing with a SG300-10MP in a lab for a potential client purchase.
I am unable to get the Auto Voice VLAN function to work correctly.
I have set the “user ports” as untagged for VLAN 20 (data vlan)
Under VLAN Management -> Voice VLAN -> Properties, I have defined VLAN 30 as
the voice vlan a
Jason -
The route running SAF EIGRP is necessary. The CUCM is considered a
SAF client while the router is the actual SAF forwarder. CUCM needs a SIP
trunk to the router to pass the DN information that it sends/receives.
this point, I don’t want to restrict anything, as I am unable to
make a connection to the database
Jeff
From: Florian Kroessbacher [mailto:florian.kroessbac...@gmail.com]
Sent: Thursday, March 20, 2014 12:42 PM
To: Jeffrey Girard
Subject: Re: [cisco-voip] Instructions on installing/configuring
From: Florian Kroessbacher [mailto:florian.kroessbac...@gmail.com]
Sent: Thursday, March 20, 2014 12:26 PM
To: Jeffrey Girard
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Instructions on installing/configuring PostgreSQL on
Windows for Presence and IM?
hy
have u checked the local fw
I have searched the Cisco site and there are tons of documents on how to
configure the database for *nix installs. I, unfortunately, am not skilled in
that arena.
I have downloaded and installed PostgreSQL on a Win2k8R2 server.
I tried to interpret the Cisco doc instructions as best I could
I
features and functions of the JFW work great. No problems.
Jeff
From: Ryan Huff [mailto:rthconsulta...@gmail.com]
Sent: Saturday, March 15, 2014 10:43 PM
To: Jeffrey Girard
Cc: Jason Aarons (AM); cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CUPC - Unable to go into deskphone control mode
me to be my problems.
Jeff
From: Ryan Huff [mailto:rthconsulta...@gmail.com]
Sent: Saturday, March 15, 2014 10:43 PM
To: Jeffrey Girard
Cc: Jason Aarons (AM); cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CUPC - Unable to go into deskphone control mode and
unable to chat
Is it an option to
gineer - WireMeHappy.com
reply to: jeffrey.gir...@wiremehappy.com<mailto:jeffrey.gir...@wiremehappy.com>
(607)835-0406 (home office)
(845)764-1661 (mobile)
(607)835-0458 (fax)
From: Jason Aarons (AM) [mailto:jason.aar...@dimensiondata.com]
Sent: Saturday, March 15, 2014 7:40 PM
for the Jabber link
Jeff
From: rot...@gmail.com [mailto:rot...@gmail.com] On Behalf Of Ted Nugent
Sent: Saturday, March 15, 2014 11:52 AM
To: Jeffrey Girard
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CUPC - Unable to go into deskphone control mode and
unable to chat
Is the a reason
Home Lab - learning Presence
CUCM 9
CUPS 9 (not 8.6 as virtually all of the help and discussion forums, documents,
etc are for)
CUPC 8.6 (3 copies running on 3 different laptops)
4 users configured in CUCM for Presence capabilities
No LDAP integration
Current status:
Presence indicators for pho
[mailto:pav.c...@gmail.com]
Sent: Thursday, March 13, 2014 5:17 PM
To: Jeffrey Girard
Subject: Re: [cisco-voip] CUPC fails to log in
Jeffrey,
Are you using jabber or cupc ?
If you are using cupc do you have the CCMCIP properly configured ?
On Mar 13, 2014 4:10 PM, "Jeffrey Girard"
mailto:j
Also posted in the new Cisco Forums
Home lab to train and learn
CUCM 9, CUPS 9 integrated. No active directory, no LDAP.
CUPS -> System -> CUCM Publisher shows all green
CUPS -> Diagnostics -> System Troubleshooter shows green (except for features
not currently activated, ie calendaring and
:52 AM, Jeffrey Girard
mailto:jeffrey.gir...@girardinc.com>> wrote:
I have posted this same request for assistance in the Cisco IP Telephony
Support Forum. So far, not hits
CUCM 9 and CUC 9. 4 IP Phones registered and all have mailboxes. I have a
System Call Handler configured to answer calls
I have posted this same request for assistance in the Cisco IP Telephony
Support Forum. So far, not hits
CUCM 9 and CUC 9. 4 IP Phones registered and all have mailboxes. I have a
System Call Handler configured to answer calls coming from a CTI Route Point.
I have been playing with a scenario
...@wiremehappy.com
(607)835-0406 (home office)
(845)764-1661 (mobile)
(607)835-0458 (fax)
-Original Message-
From: Buchanan, James [mailto:jbucha...@presidio.com]
Sent: Sunday, February 16, 2014 2:14 PM
To: Jeffrey Girard; cisco-voip voyp list
Subject: RE: Outbound MGCP/FXO calls through PSTN
Lab environment
Setup
7960 -> CUCM 8.6 -> MGCP controlled FXO port on 2811 router -> PSTN emulator
(another 2811) -> E1 trunk -> Public Router (CME) -. 7960
FXO port is set up to PLAR to the 4 digit extension on the CUCM hosted 7960.
Calls from the "public" IP phone into the FXO port work fine
- WireMeHappy.com
reply to: jeffrey.gir...@wiremehappy.com<mailto:jeffrey.gir...@wiremehappy.com>
(607)835-0406 (home office)
(845)764-1661 (mobile)
(607)835-0458 (fax)
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Jeffrey Girard
Sent: Sunday, February 16, 2014 12:04
Lab environment
Setup
7960 -> CUCM 8.6 -> MGCP controlled FXO port on 2811 router -> PSTN emulator
(another 2811) -> E1 trunk -> Public Router (CME) -. 7960
FXO port is set up to PLAR to the 4 digit extension on the CUCM hosted 7960.
Calls from the "public" IP phone into the FXO port work fine
;
(607)835-0406 (home office)
(845)764-1661 (mobile)
(607)835-0458 (fax)
From: Ryan Ratliff (rratliff) [mailto:rratl...@cisco.com]
Sent: Wednesday, February 12, 2014 4:52 PM
To: Matthew Loraditch
Cc: Jeffrey Girard; cisco-voip voyp list
Subject: Re: [cisco-voip] Impact upon licensing in lab envi
Greetings all -
My client recently purchased 2 x PAKs for CUCM servers. They have
several physical host machines configured with ESX5.
My understanding of the difference with CUCM 9 is the ELM. Licenses
are no longer tied to the MAC but are tied to some random characters
46 matches
Mail list logo