"eventual" tone at that site. Better than nothing.
-mn
-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Hughes, Scott GRE-MG
Sent: September-21-16 3:18 PM
To: Esmaeel Saberi
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] FXO D
To: Ryan Huff
Cc:
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net><mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] FXO Disconnect Detection
:-/ unfortunately, that command must already be a default is IOS 15.5M because
it doesn't show up in the runnin
happens.
Apologies!
Thanks,
Ryan
From: Hughes, Scott GRE-MG mailto:shug...@grenergy.com>>
Sent: Sunday, September 11, 2016 7:13 PM
To: Ryan Huff
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] FXO Disconnect Detection
:-/ unf
eant to suggest is
>>> that you try disabling (*no battery-reversal*) but it seems that I
>>> suggested you to enable it (in which it has always been enabled). Try
>>> disabling the support and see what happens.
>>>
>>>
>>> Apologies!
>>>
ou try disabling (*no battery-reversal*) but it seems that I
>> suggested you to enable it (in which it has always been enabled). Try
>> disabling the support and see what happens.
>>
>>
>> Apologies!
>>
>>
>> Thanks,
>>
>>
>> Ryan
>&g
s, Scott GRE-MG
> *Sent:* Sunday, September 11, 2016 7:13 PM
> *To:* Ryan Huff
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] FXO Disconnect Detection
>
>
> :-/ unfortunately, that command must already be a default is IOS 15.5M
> because it doesn't show
r 11, 2016 7:13 PM
To: Ryan Huff
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] FXO Disconnect Detection
:-/ unfortunately, that command must already be a default is IOS 15.5M because
it doesn't show up in the running config after I put
From: Hughes, Scott GRE-MG
Sent: Sunday, September 11, 2016 7:13 PM
To: Ryan Huff
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] FXO Disconnect Detection
:-/ unfortunately, that command must already be a default is IOS 15.5M because
it doesn't show up i
:-/ unfortunately, that command must already be a default is IOS 15.5M because
it doesn't show up in the running config after I put it in.
Thanks for the suggestion though!
On Sep 9, 2016, at 6:21 PM, Ryan Huff
mailto:ryanh...@outlook.com>> wrote:
EXTERNAL
You may try enabling support for b
You may try enabling support for battery reversal detection on the voice port;
voice-port x/x/x
battery-reversal
!
-Ryan
> On Sep 9, 2016, at 6:57 PM, Hughes, Scott GRE-MG wrote:
>
> Hi,
>
> I have a Cisco 2921 H.323 gateway tied to CUCM 11 with 4 FXO (loop start)
> ports in a trunk group.
Hi,
I have a Cisco 2921 H.323 gateway tied to CUCM 11 with 4 FXO (loop start) ports
in a trunk group. Unanswered calls get forwarded to an offsite answering
service (hairpinning out of the same set of FXO ports). Ports are setup with
"connection plar opx 1000"
My issue is that ports don't dete
11 matches
Mail list logo