We think this is a routing issue...
Jonathan
On Wed, Mar 16, 2016 at 3:24 PM, Bill Talley wrote:
> You're certain the PAI from CUCM to CUBE matches the pattern in your
> profile?
>
> Sent from an Apple iOS device with very tiny touchscreen input keys.
> Please excude my typtos.
>
> On Mar 16,
Thanks, I checked and the voice class sip profile is on every dial peer not
pointing at CCM, it is also applied under voice service voip - sip...
I will run the debug after hours to see why it is not being applied...
Jonathan
On Wed, Mar 16, 2016 at 12:47 AM, Anthony Holloway <
avholloway+cisc
Outbound calls probably go out with your CUCM domain name (or IP address) and
not VoIP.centurylink.com. You would want to match that in your SIP profile.
Sent from an Apple iOS device with very tiny touchscreen input keys. Please
excude my typtos.
> On Mar 16, 2016, at 12:12 AM, Jonathan Char
If you apply it under voice service voip > sip, then it's applied to all
outgoing messages, regardless of dial-peer. Specifying it on the dial-peer
level is redundant at that point, though it does take precedence over the
global configuration.
You can debug ccsip mess and grab an outgoing INVITE
You're certain the PAI from CUCM to CUBE matches the pattern in your profile?
Sent from an Apple iOS device with very tiny touchscreen input keys. Please
excude my typtos.
> On Mar 16, 2016, at 2:13 PM, Jonathan Charles wrote:
>
> Yeah, did that too.. and still seeing the unmodified P-Asserte
Yeah, did that too.. and still seeing the unmodified P-Asserted Identity...
On Wed, Mar 16, 2016 at 11:27 AM, Anthony Holloway <
avholloway+cisco-v...@gmail.com> wrote:
> If you apply it under voice service voip > sip, then it's applied to all
> outgoing messages, regardless of dial-peer. Specif
Hey Jonathan,
Make sure that the profile is on the correct outgoing dial-peer. SIP
profiles are only executed in the outgoing dial-peer, after the dial-peer
has been matched/selected.
You can use debug voip ccapi inout or debug voip dialpeer to find out which
outgoing dial-peer is being matched.
So, we have a Century Link SIP trunk and we need to send a specific
P-Asserted Identity for the call to work.
We have: a
voice class sip-profiles 101
request INVITE sip-header P-Asserted-Identity modify
"P-Asserted-Identity:(.*)@voip.centurylink.com" "P-Asserted-Identity: <
sip:3125551...@voip