Re: [cisco-voip] Need to modify P-Asserted Identity in SIP message for call to work...

2016-03-19 Thread Bill Talley
Outbound calls probably go out with your CUCM domain name (or IP address) and not VoIP.centurylink.com. You would want to match that in your SIP profile. Sent from an Apple iOS device with very tiny touchscreen input keys. Please excude my typtos. > On Mar 16, 2016, at 12:12 AM, Jonathan

Re: [cisco-voip] Need to modify P-Asserted Identity in SIP message for call to work...

2016-03-19 Thread Anthony Holloway
If you apply it under voice service voip > sip, then it's applied to all outgoing messages, regardless of dial-peer. Specifying it on the dial-peer level is redundant at that point, though it does take precedence over the global configuration. You can debug ccsip mess and grab an outgoing INVITE

Re: [cisco-voip] Need to modify P-Asserted Identity in SIP message for call to work...

2016-03-19 Thread Bill Talley
You're certain the PAI from CUCM to CUBE matches the pattern in your profile? Sent from an Apple iOS device with very tiny touchscreen input keys. Please excude my typtos. > On Mar 16, 2016, at 2:13 PM, Jonathan Charles wrote: > > Yeah, did that too.. and still seeing the

Re: [cisco-voip] Need to modify P-Asserted Identity in SIP message for call to work...

2016-03-19 Thread Jonathan Charles
Yeah, did that too.. and still seeing the unmodified P-Asserted Identity... On Wed, Mar 16, 2016 at 11:27 AM, Anthony Holloway < avholloway+cisco-v...@gmail.com> wrote: > If you apply it under voice service voip > sip, then it's applied to all > outgoing messages, regardless of dial-peer.

Re: [cisco-voip] Need to modify P-Asserted Identity in SIP message for call to work...

2016-03-15 Thread Anthony Holloway
Hey Jonathan, Make sure that the profile is on the correct outgoing dial-peer. SIP profiles are only executed in the outgoing dial-peer, after the dial-peer has been matched/selected. You can use debug voip ccapi inout or debug voip dialpeer to find out which outgoing dial-peer is being

[cisco-voip] Need to modify P-Asserted Identity in SIP message for call to work...

2016-03-15 Thread Jonathan Charles
So, we have a Century Link SIP trunk and we need to send a specific P-Asserted Identity for the call to work. We have: a voice class sip-profiles 101 request INVITE sip-header P-Asserted-Identity modify "P-Asserted-Identity:(.*)@voip.centurylink.com" "P-Asserted-Identity: <