My 35Iii came with a large shackle that goes through a hole drilled in the
aluminum bow fitting. I place a snatch block on the shackle and use that for
the tackline - places the tack forward of the headstay so I have to do outside
gybes - not a big enough slot for inside gybes.
--
Jonathan
I
> -Halyard at masthead. On the 33-2 there are three halyards available, all
> are in-masthead sheaves, parallel to each other . I currently use the
> centre one for the Genoa, and any other halyard chafes its neighbour on one
> tack.
> -Tack downhaul. There isn't one forward of the fu
Hi Steve Dwight Rick and all,
In a case of last in first out, I got an email from Wally. He had a seriously
challenging "night from hell", blew the snubbers, bent the bow-roller off, and
motored into the storm to keep the boat off the rocks. He is technology
challenged, but recuperating very
That's a decent hope to wish on most of us
On Tuesday, September 6, 2016, S Thomas via CnC-List
wrote:
> I hope that Wally is hunkered down in a nice safe marina bar right about
> now.
>
> Steve Thomas
> C&C27 MKIII
>
> ___
>
> This list is supported b
It won't work well unless you have the rudder angle sensor installed I
tried to avoid getting down below to install that rudder angle sensor and
the unit just didn't work right until I spent many hours in a cramped space
and got it done been fine ever since. Also check the connections from the
flux
I have the same tack setup on my 33ii as described by Andrew Burton; a block
just aft of the furler led to a cam cleat on the stbd side of the cockpit.
My halyards are all led aft to the cabin top, PITA when raising the gennaner
but I have a cleat on the side of the mast which I use to temporaril