Re: Stus-List Replacement Spreader

I bought replacement lower spreaders from South Shore a few years ago. But I also had a local marine fabricator repair my upper spreaders for alot less $$ Dave Folsom On Fri, May 18, 2018 at 7:59 PM, John Conklin via CnC-List < cnc-list@cnc-list.com> wrote: > following found on my 1982 37 starboa

Re: Stus-List Replacement Spreader

following found on my 1982 37 starboard lower spreader bad corrosion all others were fine ? i believe it was not taped proper and held water either way would like to know were i could find this spreader as well thanks ! John Conklin On May 18, 2018, at 9:21 PM, Jamie Stewart via CnC-List mai

Stus-List Rig shroud and stay Tuning

All I would like to know if there are any documented Rig Tuning specs for a C&C 35 Mk1 available.  Last weekend tuned it with a Loose P2 model and it ran well but the Aft stay and Center Shrouds were to big for the P2. I have attained the Loose P3 model and am looking for approximate settings that

Stus-List Replacement Spreader

I have a 1980 C&C 36, and last weekend found that the lower port side spreader was damaged when the mast was taken down last fall. Does anyone know who made the spreaders for C&C at that time, or where I can find a replacement. Any help appreciated. Jamie Stewart Seaquel Lake Champlain, VT

Re: Stus-List Vessel documentation renewal

Marek I believe licensing in a provincial thing, numbers. TC registers vessels. I’m with Rob I registered with TC in 2005. To do so you have to do a vessel search to ensure the name you use has not already been registered. A friend tried to register “Amazing Grace” and had to go with Amazin

Re: Stus-List Larzarette Opening Modification on C&C 29 mk 2

The 29-2 I used to work on had a round water heater located to STBD and hear the front of the Yanmar 2GMF15… basically under the sink. Access was pretty good from the inside of the cabin. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Eugene Fodor via CnC-List Sent: Frida

Stus-List Larzarette Opening Modification on C&C 29 mk 2

Got a new water heater and noticed that both the new one west marine box and the old one Raritan won't fit through the opening on the Lazarette. The opening is a half inch too narrow (13.5). The opening glass though has plenty to spare, so I'm thinking of just widening it up with a jigsaw or simila

Re: Stus-List Harken original roller furler parts

Hi Matthew, I would be interested in the jib feeder. Cheers, Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of Matthew L. Wolford via CnC-List Sent: Friday, May 18, 2018 12:08:54 AM To: cnc-list@cnc-list.com

Stus-List Vessel documentation renewal

Marek: In hindsight, no, I did not register the name.just licensed the boat to get the 'license numbers'. I made up the name thinking no one else would copy me and yet a boat here at the Armdale club did.I took the word 'azure', the color blue, dropped the 'e' and added an 'a'and

Re: Stus-List Vessel documentation renewal

Rob, Are you sure you “registered”? Normally, you get the boat only “licensed” with TC. Though, in Halifax, you may want to register, as I bet you sail outside of the Canadian waters. When you license, you have to renew every 5 years, if I remember correctly. But I don’t think there is any cos

Stus-List Vessel documentation renewal

Mike: I registered my boat in 2006 with Transport Canada and have never heard from them since. Rob Abbott AZURA C&C32 - 84 Halifax, N.S. On 2018-05-17 1:50 PM, Hoyt, Mike via CnC-List wrote: Hi Dennis It seems a bit different in Canada.  I received something in mail from Transport Canada

Re: Stus-List Harken original roller furler parts

Hi Matthew I would suggest that you hold on to the feeder and possibly the drum and turnbuckles. Foils are easily sourced but many of those parts are no longer manufactured and are very difficult to find. I know that I personally have to lower the collar below the feeder when racing and then