Hi Pete,
Plastic welding is the way to go. I tried various ways to repair tanks, but my
welded repairs (I fixed 3 tanks now by welding) have had no problems. Plastic
welding is rather easy to do. The key is getting good plastic welding rods.
I normally use a hot air welder, but if you are
It is not simply high or low density—the tank was made from LLDPE and rods must
be the same material.
Bob Boyer
s/v Rainy Days
C Landfall 38 (Hull # 230)
(Presently in Baltimore for the summer)
blog: dainyrays.blogspot.com
email: dainyr...@icloud.com
> On Sep 7, 2019, at 8:48 AM, Robert Boyer
OK, call Chesapeake Bay Maritime Museum dock master Josh Atwood at
410-746-4946 to reserve and pay for your slip. Tell them you are with the
C Rendezvous.
Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD
On Fri, Sep 6, 2019, 12:25 PM Josh Muckley wrote:
> Gotcha. Joe from Cochina has stated
The tank was made from LLDPE. Make sure your weld rods are the exact same
material!
Bob Boyer
S/V Rainy Days (1983 C Landfall 38 - Hull #230)
Blog: dainyrays.blogspot.com
Email: dainyr...@icloud.com
Annapolis, MD
(Presently in Baltimore MD for the summer)
> On Sep 6, 2019, at 6:31 PM, kelly