I guess they must have updated the application software. I had been covered for
3 years when they realized that Imzadi, my 38, was too big for their
underwriting standards.
I do admit that while I was covered, I was occasionally amused by the
promotional messages that lauded how big a
I believe you are right, but this is confusing to me as the Primary is the
(first) filter between the lift pump and the tank, and the secondary is under
pressure after the lift pump.
Got me interested, I found this,
https://books.google.com/books?id=vHI__6p_uxQC
Hello all,
I mentioned a while back that adding a vacuum gauge to my fuel filter was on my
list. Not an emergency, but just something that will give me a bit more piece
of mind.
I understand that I should tee in between the Racor and the lift pump, and any
significant vacuum would mean the
Guess that solves that problem.
Bill Coleman
Erie, PA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce
Whitmore via CnC-List
Sent: Wednesday, November 13, 2019 9:16 PM
To: Della Barba, Joe via CnC-List
Cc: Bruce Whitmore
Subject: Re: Stus-List Boat
Raced in Annapolis quite a bit. I believe it lived on Spa Creek at the AYC
annex. Six degrees of separation: I sold my old gas-powered air-compressor to
the guy who painted it…
Regards,
Dave Godwin
1982 C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue Refit
Good price, unless something big is wrong with it.
Cheers,
Randy
> On Nov 14, 2019, at 11:44 AM, Della Barba, Joe via CnC-List
> wrote:
>
> https://annapolis.craigslist.org/boa/d/annapolis-cc-mark-iii/7019881360.html
>
https://annapolis.craigslist.org/boa/d/annapolis-cc-mark-iii/7019881360.html
No knowledge except seeing it on CL
Joe
Coquina
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you
Any pictures??
Neil
Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661
From: CnC-List on behalf of Don Kern via
CnC-List
Sent: Thursday, November 14, 2019 12:03 PM
To: cnc-list@cnc-list.com
Cc: Don Kern
Subject: Re: Stus-List Trimming
Shawn and Dennis
On
Shawn and Dennis
On Fireball (C 35 Mk2) I have two sets of tracks. The aft set runs
from approximately the fwd cockpit main winch, 6" inboard of the toerail
at a slight inboard angle to the second set which run parallel to the
deck house to the aft lower shroud about 2" outboard from the
The sheet leads outboard of the forward shroud and inboard of the upper
shroud.
Dennis
On Wed, Nov 13, 2019, 7:29 PM Shawn Wright via CnC-List <
cnc-list@cnc-list.com> wrote:
> Thanks! Do you sheet inboard of the forward shroud usually, or does it
> depend how close to the wind you are?
>
> It
Made it in by THAT much!
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce
Whitmore via CnC-List
Sent: Wednesday, November 13, 2019 9:16 PM
To: Della Barba, Joe via CnC-List
Cc: Bruce Whitmore
Subject: [EXTERNAL] Re: Stus-List Boat insurance...reimbursement
11 matches
Mail list logo