Stus-List Re: Stus-ListUniversal diesel revs in neutral but not under load?

Have similar problem except my revs are limited to 1600, but only in reverse. Forward revs are normal. An very experienced marine mechanic diagnosed problem as excessive load on the prop. I later found my prop was clear. However, after investigating various reports I now believe my feathering p

Stus-List Re: List upgrade

So far, the only sure bet is the subject line text "Stus-List". I suggest that we all use this condition for moving emails. Btw. my previous recommendation (To cnc-list...) does not work anymore. Marek From: Stu Sent: 14 September, 2020 08:47 To: Stus-List Subject: Stus-List List upgrade Hang

Stus-List Re: Stus-ListOverheating-new installation

Actually, the area of a 1 1/2" circle is only 55% of the area of a 2" circle, so the exhaust is only about half of what is required. Area = Pi x Radius squared A = π r 2 3.14 sq.in. = π 1" 2 *1.7sq.in . *= π (.75") 2 On Mon, 14 Sep 2020 at 08:17, David Risch wrote: > Did y

Stus-List Re: Stus-ListUniversal diesel revs in neutral but not under load?

My previous boat was an Ericson 2-30, which came with an Atomic 4 engine. If your neighbor's boat originally had a gas engine, the tank has a filter at the end of the pickup tube. Try removing the pickup tube and see whether the filter is clogged. You can clean it with a solvent, or remove it compl

Stus-List Re: Stus-ListUniversal diesel revs in neutral but not under load?

Our 2GM20F had similar issues with rpm twice. First time was when we bought the boat. Simple bottom clean and all was good. Then, due to C19, we hadn't been out for 5 months and 2300 was our max while heading to the lift. After the crud and barnacles were removed from the prop and the bottom, 36

Stus-List List upgrade

Hang on a bit. We know there could be glitches in the new software. I have been in touch with our ISP and they are looking into the “FROM” concerns. If you have other problems, please let me know so they can be addressed. Stay safe – Stu___ Thanks

Stus-List Re: Stus-ListList upgrade

You can also use 'cnc-list@cnc-list.com' as a 'to' option. Marek Original message From: "Della Barba, Joe via CnC-List" Date: 2020-09-14 08:25 (GMT-05:00) To: Stus-List Cc: "Della Barba, Joe" Subject: Stus-List Re: Stus-ListList upgrade I had to redo my filters as well – I

Stus-List Re: Stus-ListList upgrade

I had to redo my filters as well - I key off of "Stus-List" in the subject line. Joe Coquina From: Danny Haughey Sent: Monday, September 14, 2020 7:40 AM To: cnc-list@cnc-list.com Subject: [EXTERNAL] Stus-List Re: Stus-ListList upgrade I notice that the emails from Stus-List are now "from" eac

Stus-List Re: Stus-ListList upgrade

I notice that the emails from Stus-List are now "from" each individual. Previously, they all showed "C&C List" in the "from" field.I'll have to update my filter to get them to go to my CnC folder -- Original Message -- From: David Risch To: "cnc-list@cnc-list.com" Subject: St

Stus-List Re: Stus-ListOverheating-new installation

Did you inquire of Westerbeke about reducing exhaust flow by 25%? Sound like it may be a lot… From: Kevin Burke Sent: Sunday, September 13, 2020 10:32 AM To: cnc-list@cnc-list.com Subject: Stus-ListOverheating-new installation I just replaced an old Westerbeke with a new/old stock Universal m3

Stus-List Re: Stus-ListList upgrade

All my emails used to go to my C and C folder…now they are all ending up in the Junk Folder… From: Stu Sent: Saturday, September 12, 2020 4:58 PM To: C&C Email List Subject: Stus-ListList upgrade I am presently upgrading our list programs to the latest versions. There should not be any disru

Stus-List Re: Stus-ListList upgrade

All my CnC mails are going into the “Junk Folder” instead of my “C and C” folder now…. From: Stu Sent: Saturday, September 12, 2020 4:58 PM To: C&C Email List Subject: Stus-ListList upgrade I am presently upgrading our list programs to the latest versions. There should not be any disruptions