At least it starts
The engine mounts seams to need love and Fiberglass
On Mon, Apr 12, 2021 at 9:50 PM Joel Delamirande
wrote:
> That cruel to leave a engine running without
> Water
>
> On Mon, Apr 12, 2021 at 4:55 PM Mike Macdonald via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Where did t
That cruel to leave a engine running without
Water
On Mon, Apr 12, 2021 at 4:55 PM Mike Macdonald via CnC-List <
cnc-list@cnc-list.com> wrote:
> Where did the boat spend the winter?
>
> Sent from my iPhone
>
> On Apr 12, 2021, at 3:04 PM, Lee Goss via CnC-List
> wrote:
>
>
> Ahoy!
>
> When our
We picked our prior boat, a 72 35 MK1, at an
auction. The person that brought it to the sale
location did not open the seacock and the engine
overheated so bad that the paint burned off. I
am not too sure what degree of harm it
precipitated. But eventually, I got it running
like a champ.
It sounds like what you are saying is it was run without cooling water till it
burnt up?
Bill Coleman
Entrada, Erie, PA
From: Lee Goss via CnC-List [mailto:cnc-list@cnc-list.com]
Sent: Monday, April 12, 2021 3:04 PM
To: Stus-List
Cc: Lee Goss
Subject: Stus-List Even More Atomic
Wow!! Mike Macdonald is on the C&C list!!??
Takin’ it to the Streets, What a Fool Believes, Real Love, Sweet Freedom —
#DoobieBrothers!
All the best,
Edd
Edd M. Schillay
Captain of the Starship Enterprise
C&C 37+ | Sail No: NCC-1701-B
Venice Yacht Club | Venice Island, FL
Where did the boat spend the winter?
Sent from my iPhone
> On Apr 12, 2021, at 3:04 PM, Lee Goss via CnC-List
> wrote:
>
>
> Ahoy!
>
> When our C&C29 MK.1 was taken out of the water last season the engine was
> left running... until it eventually just stopped.
>
> We've just tried startin
Unless you did this yourself, I would be asking the marina for another engine!
Joe Della Barba Coquina C&C 35 MK I
www.dellabarba.com
From: Lee Goss via CnC-List [mailto:cnc-list@cnc-list.com]
Sent: Monday, April 12, 2021 3:04 PM
To: Stus-List
Cc: Lee Goss
Subject: [EXTERNAL] Stus-List Even
Ahoy!
When our C&C29 MK.1 was taken out of the water last season the engine was
left running... until it eventually just stopped.
We've just tried starting it for the first time using a bucket of water,
and whilst we did get it running; it doesn't sound like it use to!
Could anyone familiar with
I didn’t mean literally calling Moyer Marine, they have an active forum full of
good advice:
https://www.moyermarineforum.com/forums/index.php
Joe
Coquina
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list
Thks everyone ken at Moyermarine is awesome just need two more like him
So if something happens to him
Or just want get our project done faster
For now I’ll try to take the head off if that not too complicated
On Mon, Apr 12, 2021 at 2:25 PM Tom Buscaglia via CnC-List <
cnc-list@cnc-list.com> wrot
I shredded several knuckles on my 35 MK1 working
on the A4. Moyer is indeed the best source for info and support.
For electronics, in addition to the distributor,
check your plug wires too. Make sure the plugs
and points are properly gapped.
I agree that sticking valves are often the
issu
Can I suggest the Moyer forum for A4 questions? There is a lot of expertise
there on A4s not restricted to A4s in C&Cs 😉
Also I think from the sounds of it you may have a stuck valve or 2 or 3. They
will collectively get you running again. Probably the first question will be
compression numbers
That looks promising, Lisle!
@Len, I could not twist it from the inside yesterday.
On Sun, Apr 11, 2021 at 10:58 PM Lisle Kingery, PhD via CnC-List <
cnc-list@cnc-list.com> wrote:
> Maybe an option?
>
> https://m.youtube.com/watch?v=lx_Zu9sW_Qk
>
> Lisle
>
>
> On Sun, Apr 11, 2021 at 8:53 PM J
13 matches
Mail list logo