Stus-List Re: Hatch in head

Jim, We’re yours A&H or Bomar? Our 33-11 had bomar’s that I replaced with Lewmar years ago … fit the moulded openings better than the originals. Paul From: Jim Watts via CnC-List Sent: Saturday, December 10, 2022 7:50:58 PM To: Stus-List Cc: Jim Watts Subject

Stus-List Re: Hatch in head

I replaced our A&H head hatch with a Lewmar hatch, but I'm not sure we would have the same unit. Here's a picture of what the mounting recess on ours looked like. Sorry, the details are fuzzy after 16 years. https://imgur.com/a/I1OfZLh Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Sat,

Stus-List Re: Hatch in head

John,You'll need to cut gently down the side from top, from bottom up and loosen it up till it comes out. Paul Hood 416.799.5549 c Original message From: John Read Date: 2022-12-10 4:35 p.m. (GMT-05:00) To: 'Stus-List' Cc: 'Paul Hood' Subject: RE: Stus-List Re: Hatch in hea

Stus-List Re: Hatch in head

Hi John, The boat is named COMP and is located in Pine Island Bay on a town mooring. Winter store at Pine Island Marina. Where in Noank are you located? Your 34 came with a hatch in the head? I ended up cutting one in about 6 years back. Best, Carl   On Saturday, December 10, 2022 at 04:4

Stus-List Re: Selling my 1975 MKII

How the deck rigging and sails On Sat, Dec 10, 2022 at 12:32 PM Kevin Benoit via CnC-List < cnc-list@cnc-list.com> wrote: > With regret, I am selling my boat. She was last sailed from Rio Dulce > Guatemala to New Orleans in 2021 and performed beautifully. She's been > sitting idle since and the e

Stus-List Re: Hatch in head

HI Carl. The forward hatch has screws. My query is about the ventilation hatch in the head – no screws Nice to see another 34 in Groton. Your boat name and where located? John Read Legacy III 1982 C&C 34 Noank, CT From: Carl Freeman via CnC-List Sent: Saturday, December 10, 2022

Stus-List Re: Hatch in head

Thanks Paul. How on earth is it set into the deck hole? I have tried all manner of trying to get it loose to no avail. You can stand on it so it's solid but I have a hard time understanding how if the sides are all vertical. John Read From: Paul Hood via CnC-List Sent: Saturday, Decembe

Stus-List Selling my 1975 MKII

With regret, I am selling my boat. She was last sailed from Rio Dulce Guatemala to New Orleans in 2021 and performed beautifully. She's been sitting idle since and the engine is seized up. I just don't have time to either get her into working condition or sail her and I can't bear to see her fall i

Stus-List Re: Hatch in head

I covered my fwd berth hatch with a canvas panel to stop leak. My smal head sklight still leaks after numerous attemps to reseal. Get Outlook for Android From: Carl Freeman via CnC-List Sent: Saturday, December 10, 2022 8:09:33 AM To: Stu

Stus-List Re: Hatch in head

John,Butyl is the way to go on these. The hatch is only held in with self tapping screws. As Paul mentioned the seal can have issues on the very back of hatch where the joint is. Carl Freeman1979 C&C34Groton, CTOn Dec 10, 2022, at 8:34 AM, Paul Hood via CnC-List wrote:John, There is no flange on

Stus-List Re: Hatch in head

John, There is no flange on these and the perimeter is vertical, top to bottom. Also, the hinge side has seal issue and is prone to leaking. Not a great design. I took mine out about 8 years ago, changed the seal, plexi, and reset it. I can't remember what I did in the resetting process but it h