I am installing a propane stove and have a CNG regulator, stove, and tank fill
adapter that will be surplus to requirements. I also have the tank itself with
a fresh inspection. I am a bit hesitant to send this tank to anyone, so far
twice now the shop has put the valve on without enough Teflon
As I have thought about this and tried to come up with a cause, another data
point occurred to me about the sequence of events. The stall has happened on
3 occasions on three different days in the last few weeks and not on 5-6 other
occasions under similar conditions. In each of the cases whe
It FITS
Yeah!!
The side mounts are EXACTLY right. The only part that needs changing is the
hole where the gimbal lock goes, I need to drill it about ¾” forward of where
it is now. I am so relieved 😊
One issue I am not sure about is the sliding board that goes over t
I know this is like the 5th time I have posted this – get a fuel pressure
gauge! I went about insane diagnosing shutdowns until I did so and uncovered
things I could never have figured out otherwise.
Joe Della Barba
Coquina C&C 35 MK I
Kent Island MD USA
From: David Knecht via CnC
I agree with you regarding purging air, warming up not so much.
If your purging air theory is correct, there must be a small air/vacumn leak
somewhere in your system between the tank and injectors that lets air in the
system while the boat in sitting in the water between your uses of it.
When fin
Joe,
Can you run under the stove then up the forward side between the stove and
the forward half bulkhead? I might not be visualizing accurately.
--
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Fri, Jun 30, 2023 at 1:45 PM Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> It FITS!!
I'd be looking at replacing the fuel pump and all the supply side hoses.
Not a huge expense. Especially if you have a spare fuel pump already. If
you don't have a spare, I'd strongly recommend getting one. I suspect it's
the same pump as my 25XPB, Westerbeke Part 039275. Westerbeke wants $256
f
It is going up just forward of the bulkhead aft of the stove and then will run
horizontal aft at the top of that storage area outboard of the icebox and then
to the stern.
A quick test with my adapter and a one-pound grill bottle shows all is well,
now I need to get the tank mount set up.
I R