Loosen the backstay.
On 8/13/2017 1:28 AM, Russ & Melody via CnC-List wrote:
Hi Al,
Hoist a fender up a halyard so it hangs somewhere between the upper &
lower spreaders and is near or alongside the mast.
Or, goggle vortex shedding and then after an hour or so of reading,
see above.
It'
I've had that happen several times until I figured out what was wrong.
If you're engaging it to "track", in other words, to steer to a
waypoint, you need to engage "track" immediately after setting your
chartplotter to "navigate to". If you set the chartplotter to "navigate
to" a waypoint, th
;>
>> http://cnc-list.com/pipermail/cnc-list_cnc-list.com/2010-October/035503.html
>>
>>
>> -Original Message-
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Mark
>> Smith via CnC-List
>> Sent: July-26-17 22:03
>
Can somebody point me to a thread discussing replacement of old style aluminum
framed portlights?
I have a 1977 C&C 30 Mark 1. The portlights were replaced previously by the PO
and I don't think they were
done correctly, so I don't have a reference to go by to do it right. Are there
any diag
