When I got my “new” boat last spring, I had intermittent starting problems.
The yard mechanic told me that in his experience these were caused by bad
grounds most of the time. Sure enough, when I cleaned the ground connections
to the engine, the problem went away. Dave
On Aug 16, 2014, at
I had a recent issue just prior to and into the first week of a recent
month-long sailing trip where I had intermittent starting problems with my
3HMF30. It turned out to be the solenoid for the starter. The old solenoids
are sealed units--so there really is no way to repair them. I then
It is a good idea to have a start switch mounted near the engine for starting
during service.
It can be wired directly from the plus to the solenoid. Then in an urgent
situation you can run down and start if the normal start doesn't work.
Don Newman
CC 44 Hamilton ON
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Martin
DeYoung via CnC-List
Sent: Thursday, August 14, 2014 10:35 AM
To: Raymond Macklin; cnc-list@cnc-list.com
Subject: Re: Stus-List 2GM20F Engine will not start - Possible Fuse Issue.
I had a similar issue with a 1980 CC 36’s 3 cyl. Yanmar
, August 14, 2014 10:35 AM
To: Raymond Macklin; cnc-list@cnc-list.com
Subject: Re: Stus-List 2GM20F Engine will not start - Possible Fuse Issue.
I had a similar issue with a 1980 CC 36’s 3 cyl. Yanmar after a night passage.
The electrical load from the running lights and other nav equipment caused
]
*From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Raymond
Macklin via CnC-List
*Sent:* Thursday, August 14, 2014 5:08 AM
*To:* cnc-list@cnc-list.com
*Subject:* Stus-List 2GM20F Engine will not start - Possible Fuse Issue.
Hello:
I have a 1985 CC 33-2 with a Yanmar
10:35 AM
*To:* Raymond Macklin; cnc-list@cnc-list.com
*Subject:* Re: Stus-List 2GM20F Engine will not start - Possible Fuse
Issue.
I had a similar issue with a 1980 CC 36's 3 cyl. Yanmar after a night
passage. The electrical load from the running lights and other nav
equipment caused a fuse
36
Elliott Bay
From: Martin DeYoung [mailto:mdeyo...@deyoungmfg.com]
Sent: Friday, August 15, 2014 10:23 AM
To: Raymond Macklin; Brad Crawford
Cc: cnc-list@cnc-list.com
Subject: RE: Stus-List 2GM20F Engine will not start - Possible Fuse Issue.
Could it be heat related.
As the temp
...@deyoungmfg.com');]
*Sent:* Friday, August 15, 2014 10:23 AM
*To:* Raymond Macklin; Brad Crawford
*Cc:* cnc-list@cnc-list.com
javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');
*Subject:* RE: Stus-List 2GM20F Engine will not start - Possible Fuse
Issue.
Could it be heat related
]
*Sent:* Friday, August 15, 2014 10:23 AM
*To:* Raymond Macklin; Brad Crawford
*Cc:* cnc-list@cnc-list.com
*Subject:* RE: Stus-List 2GM20F Engine will not start - Possible Fuse
Issue.
Could it be heat related.
As the temp rises so does the DC resistance. If the start / run wiring
has
Crawford
Cc: Martin DeYoung; cnc-list@cnc-list.com
Subject: Re: Stus-List 2GM20F Engine will not start - Possible Fuse Issue.
Everyone:
Thanks for the input. I replaced the 30 amp fuse like i was instructed and
it started up right away. Brad brings up a good point. Could it be heat
Hello:
I have a 1985 CC 33-2 with a Yanmar, Diesel 2GM20F engine. I was sailing
last night and started the motor like normal to get out of harbor.
However, when I went to come back in to the harbor. I proceed to follow
my normal process. I put the transmission in Neutral and reached down to
Yes, in the wiring loom facing the front of the engine the harness will
have an inline fuse. it runs from the Starter to the start switch.
I will send you a link to the diagram.
It's a 30 amp fuse. Sometimes it needs a good cleaning sometime a new fuse.
I keep 3 or 4 extra on the boat as spares.
-list.com] On Behalf Of Raymond
Macklin via CnC-List
Sent: Thursday, August 14, 2014 5:08 AM
To: cnc-list@cnc-list.com
Subject: Stus-List 2GM20F Engine will not start - Possible Fuse Issue.
Hello:
I have a 1985 CC 33-2 with a Yanmar, Diesel 2GM20F engine. I was sailing last
night and started the motor
To: Raymond Macklin; cnc-list@cnc-list.com
Subject: Re: Stus-List 2GM20F Engine will not start - Possible Fuse Issue.
I had a similar issue with a 1980 CC 36’s 3 cyl. Yanmar after a night passage.
The electrical load from the running lights and other nav equipment caused a
fuse located
*Sent:* Thursday, August 14, 2014 10:35 AM
*To:* Raymond Macklin; cnc-list@cnc-list.com
*Subject:* Re: Stus-List 2GM20F Engine will not start - Possible Fuse
Issue.
I had a similar issue with a 1980 CC 36's 3 cyl. Yanmar after a night
passage. The electrical load from the running lights
16 matches
Mail list logo
