An excellent job; amazing how much more room there is on the 37+ than my 1985 
37...no comparison...!


Richard

Richard N. Bush  

s/v Bushmark4: C&C 37 CB; Ohio River mile 596.5



2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-----Original Message-----
From: Doug Allardyce via CnC-List <cnc-list@cnc-list.com>
To: cnc-list <cnc-list@cnc-list.com>
Cc: Doug Allardyce <dalla...@ameritech.net>
Sent: Fri, Oct 27, 2017 12:41 pm
Subject: Re: Stus-List (no subject)



Thank again Gary. This is very helpful. You did a great job laying everything 
out and then executing. No mysteries now on what needs to be done. Great 
installation.
 
Doug Allardyce 
~~~~~~~~_/)~~~_/) ~~~~~~~~ 
  
-----Original Message-----
From: CnC-List   [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Gary 
Russell via   CnC-List
Sent: Friday, October 27, 2017 11:25 AM
To:   C&C List
Cc: Gary Russell
Subject: Re: Stus-List (no   subject)


  
Hi Doug,  
     I had to cut a section out of the tube (terrifying)   but it worked out 
great.  Just do all the reinforcing first, before you   cut it so everything 
stays lined up.  The tube supports the deck.    See pictures below:
  


  
Gary
  
​
  
 High Maintenance Autopilot Project
​

  

  
  
~~~~~~~_/)~~~~~~



  
On Fri, Oct 27, 2017 at 9:52 AM, Doug Allardyce via   CnC-List 
<cnc-list@cnc-list.com> wrote:
  
    
    
Thanks Gary. Was a portion of the rudder shaft     exposed, or did you have to 
cut a section of the tube away to install the     arm for the auto pilot ram.
    
 
    
Doug Allardyce 
~~~~~~~~_/)~~~_/) ~~~~~~~~ 
    
    
    
      
-----Original       Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of       Gary 
Russell via CnC-List
Sent: Friday, October 27, 2017       9:31 AM
To: C&C List
Cc: Gary       Russell
Subject: Re: Stus-List (no subject)


      
Yes, I do.  I put one in a 37+ and I love it.       


      
Gary
      
S/V Kaylarah
      
'90 C&C 37+
      
East Greenwich, RI, USA
      

      
      
~~~~~~~_/)~~~~~~



      
On Fri, Oct 27, 2017 at 9:14 AM, Doug Allardyce via       CnC-List 
<cnc-list@cnc-list.com> wrote:
      
Does anyone out there have experience putting a below         deck autopilot on 
a 34
plus or 37/40.



Doug         Allardyce
~~~~~~~~_/)~~~_/)         ~~~~~~~~


_______________________________________________

The         bills have started coming in for the year 2018 and have gone up     
    again.  October will be our fund raising month.  Please         consider 
sending a small contribution to help keep this list         running.  Use 
PayPal to send contribution --   https://www.paypal.me/stumurray

All         contributions are greatly     appreciated!







_______________________________________________

The     bills have started coming in for the year 2018 and have gone up again.  
    October will be our fund raising month.  Please consider sending a     
small contribution to help keep this list running.  Use PayPal to send     
contribution --   https://www.paypal.me/stumurray

All     contributions are greatly appreciated!





_______________________________________________

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

_______________________________________________

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Reply via email to