om>>
> To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
> Subject: Stus-List Auto pilot installation
> Message-ID:
><mailto:caao56oef08akssmxgajp1q+nug5bsmwfqb6zpywfvnxc4m6...@mail.gmail.com>>
> Content-Type: text/plain; charset="utf-8"
>
Make sure you put the autopilot control head within reach from the helm. I made
the big mistake of initially mounting it on the bulkhead, not good. I
eventually relocated it on a pod on the pedestal, big improvement.___
This list is supported by the ge
Same here. Never had a need to change.
David F. Risch
1981 40-2
(401) 419-4650 (cell)
Date: Sun, 27 Mar 2016 20:41:09 -0400
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Auto pilot installation
From: cnc-list@cnc-list.com
CC: captnga...@gmail.com
I mounted mine on a Navpod on the pedestal
On my 1976/77 C&C33 the ST 4000 control head is installed (2001) on the
port T bulkhead (similar to the engine control panel on the opposite
side). It is mounted as high and aft as quarter berth access will allow.
There is a round inspection port next to and aft of the control head. I do
occasiona
To: C&C List
Cc: Gary Russell
Subject: Re: Stus-List Auto pilot installation
I mounted mine on a Navpod on the pedestal guard on my C&C 35 Mk II.
Gary
~~~_/)~~
On Sun, Mar 27, 2016 at 8:36 PM, Annette Reesor via CnC-List
wrote:
We have purchased a wheel pilot for our
Ours is mounted on the inside of the cockpit on starboard, in the narrow
part of the T. Wherever you mount it, make sure you can't do stuff to it
with your knees while docking, etc.
We have had sudden episodes of tight circles when someone rushes to the
natural point to grab lines. If it's disengag
If you plan to operate the boat singlehanded then I suggest finding a place
that is as easy to reach from in front of the helm as it is from behind.
Directly outboard of the wheel works well on my boat.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Mar 27, 2016 8:37 PM, "Annette Reesor vi
I mounted mine on a Navpod on the pedestal guard on my C&C 35 Mk II.
Gary
~~~_/)~~
On Sun, Mar 27, 2016 at 8:36 PM, Annette Reesor via CnC-List <
cnc-list@cnc-list.com> wrote:
> We have purchased a wheel pilot for our 1976 C&C 33, but are wondering
> where others have installed the cont
We have purchased a wheel pilot for our 1976 C&C 33, but are wondering
where others have installed the control head? The T shaped cockpit doesn't
seem to have much 'free' space. Any suggestions would be appreciated.
Annette
___
This list is supported