Based on putting a well worn 89 under contract (that failed the sea trial) and
then purchasing the pristine Alera I think that the boat you are describing
should be priced out at around 80-82k. But I'm no broker.
The things that would cause me a great dal of concern is that any intrusion
into
sters. And finally the
aft bulkhead was only tabled to the hull in spots.
Michael Cotton
>
> From: Rick Brass
>To: kenhea...@gmail.com; cnc-list@cnc-list.com
>Sent: Sunday, October 7, 2012 11:50 AM
>Subject: Re: Stus-List Best price on a 1989
alue because
of technology and faster data collection and reporting methods.
Rick Brass
Washington, NC
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ken
Heaton
Sent: Sunday, October 07, 2012 7:54 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Best price o
Hi David,
I suppose this is obvious but make sure your surveyor is able to be certain
there are no issues with wet or delaminated balsa core in the hull and
deck. I don't have the 1989 laminate schedule but the
1990 laminate schedule for the 37+ for both hull and deck shows 1" of balsa
throughout
Re escrow. When I bought Indigo it was on the hard and winterized. I had it
surveyed on the hard. My broker arranged for a significant amount of the
contract amount to be held, I think by him or perhaps with an attorney, until
the spring when we could splash and test out the engine / transmissio
[David Roberts] Wow great feed back! I do know how to run the engine out of
the water. I normally just stick the inlet hose in a bucket that I am
running a flow regulated water hose into. I just keep the buck full, works
great. But that won't let me check the engine under load I think I agree
that
@cnc-list.com
Sent: Saturday, October 6, 2012 12:06:16 AM
Subject: Re: Stus-List Best price on a 1989 CNC 37+
It should be able to stand a brief run. They usually run dry for a bit after
launch.
Rich Knowles
Indigo - C&C LF38
Halifax - Nova Scotia
On 2012-10-06, at 1:02, "Della
cnc-list@cnc-list.com
> Subject: Re: Stus-List Best price on a 1989 CNC 37+
>
> Yachtworld maintains a database of sold vessels. It is more accurate
> than the blue book.
> Sounds like a boat listed in Spinsheet. If its the same boat and
> that's all it needs it sounds like a
Joel, where do you find the database of sold vessels in Yachtworld?
> From: joel.aron...@gmail.com
> Date: Sat, 6 Oct 2012 03:47:59 -0400
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Best price on a 1989 CNC 37+
>
> Yachtworld maintains a database of sold vessels. I
If you do go to contract on this boat , I strongly recommend that you have an
escrow to cover as much as you possibly can. I would be very wary of buying any
boat, let alone one that has been on the hard for several years, without a sea
trial
Jonathan
C&C 35 mk III
--
Jonathan
Trade Show Servi
Yachtworld maintains a database of sold vessels. It is more accurate
than the blue book.
Sounds like a boat listed in Spinsheet. If its the same boat and
that's all it needs it sounds like a bargain! I'd recommend a rigging
survey in addition to a survey. If it is rod rigging it may need to
be
riginal Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich
> Knowles
> Sent: Friday, October 05, 2012 11:50 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Best price on a 1989 CNC 37+
>
> If there is enough battery power available
The impellor(s) won't be :(
Joe Della Barba
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich Knowles
Sent: Friday, October 05, 2012 11:50 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Best price on a 1989 CNC 37+
If there is e
If there is enough battery power available, you could start the engine for a
minute or so with no water. If there are no unusual mechanical noises, it's
likely ok.
Rich Knowles
Indigo. LF38
Halifax
On 2012-10-05, at 23:51, "David Roberts" wrote:
We are getting ready to enter into negotiation
PM
To: cnc-list@cnc-list.com
Subject: Stus-List Best price on a 1989 CNC 37+
We are getting ready to enter into negotiations on a 1989 CNC 37+. The boat
is in fair condition and it has a few issues; it needs new upholstery; the
keel joint needs to be re-glassed in; all the running rigging is ready
amp;C 34R
Atlantic City, NJ
- Original Message -
From: "David Roberts"
To: cnc-list@cnc-list.com
Sent: Friday, October 5, 2012 10:51:39 PM
Subject: Stus-List Best price on a 1989 CNC 37+
We are getting ready to enter into negotiations on a 1989 CNC 37+. The boat
is in fair con
We are getting ready to enter into negotiations on a 1989 CNC 37+. The boat
is in fair condition and it has a few issues; it needs new upholstery; the
keel joint needs to be re-glassed in; all the running rigging is ready to be
replaced; it has a universal M35 and it looks like it had been over hea
17 matches
Mail list logo
