The other day I was at the boat and there was a little water in the bilge that
was lower than the float switch. I raise the float switch by hand and it will
start the pump and clean out most of the water still standing in the bilge. On
this day something different happened, the water pump kicked
I had a non submersible pump with a hose that lead to a small strainer. It
had a hose clamp, not tape. If I can find the strainer you are welcome to
it
Joel
35/3
Annapolis.
On Apr 18, 2013, at 5:05 PM, TOM VINCENT wrote:
The other day I was at the boat and there was a little water in the bilge
On our boat, it was built with white plastic hose for one of the bilge
pumps. The section that was down deep in the bilge became brittle,
probably due to the occasional presence of a little engine oil. It became
brittle enough to crack off completely. Perhaps the same thing happened to
your hose
CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ken
Heaton
Sent: April 18, 2013 6:31 PM
To: cnc-list
Subject: Re: Stus-List Bilge pump pick up hose
On our boat, it was built with white plastic hose for one of the bilge
pumps. The section that was down deep in the bilge became brittle, pro
