Christian, just sent a photo of my chainplates to you. Sounds like your setup is more simple. Lucky you! As I mentioned, that topside plate is welded to my chainplate so to get underneath it I have to lift the entire unit. Oy!
Cheers, Dave “Diligently Adding Butyl to the Mast Collar” Godwin Sent from my iPhone > On Apr 26, 2018, at 12:28, Christian Planton via CnC-List > <cnc-list@cnc-list.com> wrote: > > Dave Godwin, > > My worry with butyl is that with all the movement of the plates it will > somehow not seal as well where its is not under as much compression. I was > toying with the idea of doing one side with butyl and the other with 4200. To > see which lwas easier to work with, lasted longer, and other stuff...My > plates look to have a plate that screws down around the plates that pass thru > the deck. I think all I have to do is lift that, clean well, and rebed. It > is a small leak. > > Christian > 1980 C&C 34 - Peer Gyth > Saugatuck, CT > > > > Wilton Public Schools is transitioning e-mail systems. Effective > immediately, please update your contact list to reflect the new e-mail > address plant...@wiltonps.org. > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
