Just buy the 2-3 closest sizes. Send back the incorrect ones.
Dennis C.
Sent from my iPhone
> On Feb 12, 2016, at 10:52 AM, Josh Muckley via CnC-List
> wrote:
>
> Sounds like you're trying to ensure that you have parts on hand. Based on
> other's responses, I'd say it sounds like you have
y 12, 2016 2:28 PM
To: cnc-list@cnc-list.com
Cc: Paul Fountain
Subject: Re: Stus-List Cutlass bearing size issue
Brian, try sanding the ends of the bearing/strut so you can see the brass
bearing sleeve and bronze strut, may help you get an accurate size.
Paul Fountain
Perception II
1985 C&
via CnC-List
Sent: Thursday, February 11, 2016 5:23 PM
To: cnc-list@cnc-list.com
Cc: Brian Fry
Subject: Stus-List Cutlass bearing size issue
Attempting to replace cutlass bearing.
Shaft is 1.25"
ID of the strut where the bearing goes is 1.625", which by my calculation is 1
and 5/8.
I
http://www.duramaxmarine.com/pdf/CutlessBearingMS.pdf
Above link shows commonly available sizes.
Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
On 2/11/2016 5:23 PM, Brian Fry via CnC-List wrote:
Attempting to replace cutlass bearing.
Shaft is 1.25"
ID of the strut where the bearing goes is 1.
Sounds like you're trying to ensure that you have parts on hand. Based on
other's responses, I'd say it sounds like you have a bearing that is 1 1/4
x 1 1/2.
Let us know what you end up finding. My shaft is 1.25 as well but I have
yet to need a new cutlass bearing.
Josh Muckley
S/V Sea Hawk
198
via CnC-List
Sent: Thursday, February 11, 2016 6:45 PM
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Re: Stus-List Cutlass bearing size issue
Brian,
Mine was hard to measure because there was a slight taper to the hole at the
ends of the strut. You might double check the measurement
FWIW, the shaft on Orion, a Landfall 35 with a Yanmar 3HM was 1 1/8" diameter.
Being replaced now along with cutlass bearing due to shoddy sling placement at
haul out.
Chuck Gilchrest
Sent from my iPhone
> On Feb 11, 2016, at 5:23 PM, Brian Fry via CnC-List
> wrote:
>
> Attempting to repla
Brian,
Mine was hard to measure because there was a slight taper to the hole at
the ends of the strut. You might double check the measurement. 1 5/8
would be odd.
Joel
On Thursday, February 11, 2016, Brian Fry via CnC-List <
cnc-list@cnc-list.com> wrote:
> Attempting to replace cutlass bearin
Attempting to replace cutlass bearing.
Shaft is 1.25"
ID of the strut where the bearing goes is 1.625", which by my calculation
is 1 and 5/8.
I cannot find a bearing that is 1 1/4 X 1 5/8.
Only 1 1/4 X 1 1/2 or 1 3/4
Cant find metric equivalent either.
Brian Fry
La Neige
HdG MD
1993 37/40XL
__
