Mike,
I have done my cockpit sole with kiwi grip..it is easy to reduce the peaks
and valleys that great non skid by pressure used on the roller...i used the
roller provided by kiwi grip and it worked out great...practice on a piece of
plywood if you are concerned.
BTW, kiwi can be tinted by
I think the agressiveness is controlled by which roller cover you use and how
many coats. Practicing on a board before doing the boat sounds like the best
approach.
If I remember right Kiwi Grip is water based so no mixing and little cleanup.
> On May 3, 2019 at 7:30 AM Headgorilla via
*The PO of my boat had 2 thick coats of Interdeck (interlux) poured over the
entire deck of the boat rail to rail.
While it looked uniform and safe to walk on it seemed to be chalky. It seemed
as if it was not holding up well in the Sun and was deteriorating faster than
anything I had seen.
